What To Do If The Washing Machine Won’T Open

When it’s ok?

The question of how to open the machine during washing should not be. it will not work under any circumstances, since all washing machines provide protection against opening the door during washing. This is done in order to prevent such situations when boiling water from the drum, along with all things, is poured out. and hot water can cause injury to health. Therefore, you should not look for ways to open the washing machine during washing, even if it has turned off due to a power outage.

In some models of washing machines, the unlocking of the door lock does not occur immediately after the end of the washing process, but after 1-3 minutes. This is done to prevent the user from opening the door immediately after turning off the engine, while the drum is still rotating at high speeds. Also, in the allotted time before opening the door, the interior of the machine cools down, which reduces the likelihood of getting burned. That is why you should not panic if the washing machine does not open after washing in the first 3 minutes.

Washing machine door won’t open? The problem can be solved!

The situation when the washing machine door does not open after washing is actually not so common, and therefore, when a problem occurs, the owners and housewives have at least bewilderment, and sometimes panic. Normally, the device automatically unlocks the door lock a few seconds after the end of the wash cycle. The cause of such a failure can be both an internal software failure and external causes. So, why the washing machine does not open after washing, and how to give freedom to your things?

Fixing the blocking problem

So, it’s been a long time, but the machine won’t open after washing? Don’t panic. the problem is solvable. The solution path will depend on the reason for the block:

  • Power outage. It often happens that the washing machine does not open the door after washing, especially if a power outage occurred during the washing process (which many people take as the end of the cycle). In this case, you do not need to try to open the door by force, as hot water will probably remain inside. Just wait for the light to show.
  • There is still water in the drum. Sometimes a malfunction occurs due to which the machine does not drain the water after washing, and therefore does not open the door. In this case, it is necessary to understand why the waste water drain does not work. After draining, the door is unlocked.
  • Broken handle. Sometimes, in a fit, users break the door mechanism or the handle itself, thereby depriving themselves of the opportunity to get things. How to open the washing machine after washing if the handle is broken? Repair it yourself or call a specialist qualified in this area. there are no other options.
  • Failure in electronics. Why doesn’t the machine open after washing if there is no apparent reason for that? The drum water level sensor may be out of order. In this case, you will have to take care of replacing it, since a broken one will not allow you to open the door.

What to do if the washing machine does not open after washing, and you need to get things urgently? In this case, you can take a risk and try to unlock the lock manually by sticking your hand through the bottom or behind the case. you cannot do without partial disassembly of the unit, and you can also lose your warranty. That is why, if the washing machine does not open after washing, you should find the cause and start to eliminate it in safe ways.

READ  The Washing Machine Stinks What To Do

A simple solution

Why does the hatch not open even though all washing modes are finished? As we have already said, there are quite a few answers to this question. there are objective reasons as a result of the failure of mechanical components or automation.

Every time you need to scrupulously carry out diagnostics before coming to any decision. In conclusion, I would like to offer a rather unique way of unlocking, when the door still does not open in the washing machine after completing all washing modes. Watch a small plot, and everything will become clear to you:

There is still water in the machine

The hatch door may not open due to the fact that there is water in its tank. Therefore, the machine locks the hatch door. If there is water left in the machine, then a breakdown has occurred. In this situation, troubleshoot and then drain the water. Then the door is unlocked.

Fittings

This refers to the door handle. Check how it moves. if it is very free, as if the hatch is unlocked or even open, it is likely that it has broken. Repairing a handle is a thankless task. The process will take a lot of time and it is not a fact that it will help at all. Replacing it seems to be a much simpler solution.

You can replace the hardware yourself with a new one. To do this, you need to unscrew the hatch, and then disassemble it (it consists of several parts). It is inside the door that the handle is installed. Next, you need to install a new locking element and, strictly observing the procedure, collect everything back.

If the door handle is broken, it is better to replace it with a new one.

The principle of replacing fittings for each model of the washing machine is different. Therefore, here you can only give general recommendations described above. If you doubt that you will be able to carry out the replacement with your own hands, you can always resort to the help of specialists.

Causes of equipment breakdown

The most common reason why the door of the washing machine does not open after the end of the wash is the breakage of the handle itself. This is a mechanical problem. To eliminate it, you will have to use additional means, but to open the hatch you will not have to call the master.

What To Do If The Washing Machine Won'T Open

The reason for the breakdown of the mechanism can be: wear of its parts, rough handling, poor-quality part that was originally supplied to the device.

Determine that the breakdown in this will help the inspection of the equipment blocking device. The handle for opening the door will freely “walk” in both directions, but the characteristic opening will not occur.

What to do in this case:

  • Disconnect power supply. Just unplug the power cord.
  • Open the hatch at the bottom of the vehicle. There, find a hatch for emergency water discharge. In some models, this part also contains a cable with which you can unlock the door. Most often, the rope is a small section of orange rope.
  • Pull the cable.

A more difficult option in the absence of a cable for emergency opening of the hatch:

  • Disconnect the machine from the network.
  • Unscrew the top panel and remove it to the side.
  • Tilt the car back.
  • The drum will move slightly in the same direction.
  • Feel the latch with your hand and pull it.

This method is best done together to facilitate the task.

The next problem, why the door cannot be opened, may be a malfunction of the door interlock device. This element also wears out and fails. The procedure in the previous paragraph will help to correct the situation. You will have to open the door forcibly.

READ  How To Choose A Front Loading Washing Machine

Important! A broken element must be replaced before the next use of household appliances.

If the handle and the module are working properly, then the reason for blocking the hatch may be a breakdown of the electronic module. This is a system that triggers an unlocking mechanism when a certain cipher is submitted. So, the machine can complete the washing process, but the signal about this does not go to the board. You can solve the problem with the help of a specialist. To do this, you need to do one of the following:

  • Reflash control board.
  • Buy and install a new control unit. This procedure is more expensive but effective.

The cost of repair if it is necessary to replace the elements of the washing machine depends on the cost of the parts and the model of equipment itself.

Household appliances store

When you need a specialist. Control module

Hardware failure is the most difficult type of failure.

In this case, everything will be in good working order. the door itself, UBL, lock, handle, etc., but automatic unlocking will not be available. This indicates that the corresponding command does not come from the programmer or control board (depending on the device model).

What to do if the washing machine does not open after washing precisely because of a module breakdown? First of all, you need to unplug the device from the mains and leave it in this state for several hours. It is possible that all data on the current washing mode will be reset to zero, due to which the door will open.

To eliminate such breakdowns, it is best to call the master

If it doesn’t help, feel free to call the master. A flashing of the control unit or programmer will be required. This is a complex process, for which you need to have not only the relevant knowledge, but also the necessary technical equipment.

In the most severe cases, for example, in the event of a complete failure of the module (due to a sharp voltage drop in the network, natural wear and tear, etc.), it will be necessary to replace it. This is also a job for professionals. In addition, replacing the board is the most expensive repair, because you will need to supply a new part, which has a high cost. Accordingly, if you are the owner of an outdated model, then consider purchasing a new washing machine.

What to do if the washing machine does not open after washing. what to do, how to unlock the lock and open the door, including in the event of an unfinished wash

You will also be interested to read:

Open the door

We figured out the reasons why the door in the washing machine does not open, but now we need to open it and take out the washed laundry. Before doing this, make sure that there is no water in the drum so as not to flood the neighbors.

To properly unlock the door, you can use the recommendations in the attached instructions for each product, or proceed as follows:

  • Disconnect the household device from the network.
  • We open the hatch where the drain filter is located: it is located at the bottom of the machine. Check if there is an orange colored cable. We pull for it without undue effort. the door of the machine should open.
  • If there is no emergency cable, then remove the top panel, tilt the machine back. The drum, due to its own weight, will move away from the wall, and in the gap that appears, you will need to grope for the lock and open it, shifting to the side.
READ  How To Install A Tumble Dryer On A Washing Machine

If you doubt your abilities, then it is better not to try to unlock the hatch yourself. entrust it to professionals.

Sudden blackout

During washing, a power surge occurred or the light was turned off. You heard that the machine stopped and came to pick up the washed laundry. The hatch at the washing machine does not open, since the washing process is not finished, and the automatic system blocks the door.

You need to check the automatic power outage in the house or wait until the mains voltage is given, then put the continuation of the mode or spin. The machine will continue to work, and after finishing you will calmly open the hatch.

Locking lock worn out

If the door does not open, it is possible that the lock mechanism has broken down due to wear and tear, so you cannot open the door. In this case, you need to contact the repair shop for help.

A simple solution

Why does the hatch not open even though all washing modes are finished? As we have already said, there are quite a few answers to this question. there are objective reasons as a result of the failure of mechanical components or automation.

Every time you need to scrupulously carry out diagnostics before coming to any decision. In conclusion, I would like to offer a rather unique way of unlocking, when the door still does not open in the washing machine after completing all washing modes. Watch a small plot, and everything will become clear to you:

Reasons for jamming

All modern household appliances for washing are equipped with an automatic system that blocks the hatch from accidentally opening during washing. The reason that the door does not open after washing may be the delayed operation of the automatic.

When the whole process is over, a few minutes should pass, and the machine will work, the hatch for loading the laundry can be opened without any effort.

Water left

One of the reasons why the door of the washing machine does not open may be that there is still water in the tank, so the machine locks the door. Look into the hatch: if there is water, then some kind of breakdown has occurred. It is necessary to eliminate it, drain the water, and the automation will unlock the door.

UBL module malfunction

It gives a signal to open the door after the end of the wash cycle. If the UBL is faulty, the washing machine will not open. There are cases when the blocker itself is serviceable, just the automation does not give a signal to open it.

  • reflash the control board if the module is electronically controlled
  • reset all values ​​of the programmer when it is electromechanical type.

These actions are performed only by specialists.

Electronics malfunction

Perhaps the water level sensor gives incorrect data: the water is drained, but there is no signal to the control system about its absence, so the door is locked. It is necessary to change the sensor to a working one.

If the hatch of the LG, SAMSUNG, Bosch washing machine is blocked, then it is best to refer to the original source. the attached instructions, there are all the necessary recommendations.

Broken handle

This happens very rarely, but we are considering all options. In case of breakage, the handle will hang in a free position, and the cover of the washing machine loading hatch will not open. In this case, the handle must be replaced.

Many are trying to implement the replacement on their own. Please note that after your intervention, you may have to change the hatch along with the locking system.

Is the handle in good condition and the door won’t open? Locking fault, call a specialist.