Washing Machine LG Error Cl What Does It Mean

CL error on LG washing machine: causes and remedies

If the CL error code appears on the display of your LG washing machine, it can be confusing. The reason for this is the lack of information on this encryption in the operating instructions. But in fact, the CL code is not an error, but a function to enable child protection. When it is activated, the entire working panel of the washing machine seems to freeze, not a single key responds to pressing. The problem arises when you need to unlock the work panel, because this information is not in the documents.

Self repair: cleaning contacts

However, if you have some skills in working with electronics, you can take up the repair yourself:

Detach control panel. Different models of LG washing machine do this in different ways, but you can always use the instructions.

Wipe the panel with alcohol. Result. a layer of grease, washing powder and dirt that could get into the grooves and prevent the buttons from being pressed will be removed.

Take a multimeter and use it to check if there is contact between the buttons and the board. To do this, just touch the contacts. There is tension. everything is fine, the washing machine can be put back, the cause of the error is not here No tension? There was a gap somewhere.

Inspect the wires. If there is a break, then you need to see where the wires are faulty. Often contacts come off due to moisture or rust, a break is usually clearly visible even with the naked eye.

Washing Machine LG Error Cl What Does It Mean

Clean the wires at the break. To do this, they are slightly trimmed, dirt and oxidation products are cleaned off, and then carefully twisted together.

The final check is again with a multimeter. If contact appears, then everything is fine, you can put the washing machine back. Did not appear. somewhere else there is a gap and the actions need to be repeated.

It is also possible that the entire button is out of order. Then you have to buy and install a new one. or else find somewhere similar and swap it with the first one. This is done with a soldering iron:

Unsoldered terminals that hold the button in place.

A new button is inserted that will definitely work.

Terminals are soldered back.

It is not difficult to work with such minor problems, it takes mostly patience and perseverance. In extreme cases, if, due to inexperience, something is irretrievably damaged, replacing several buttons or the control panel of the washing machine is completely inexpensive.

Cl error code in LG washing machine. what it means and how to fix it

Why does the code appear

As we said, the CL (Child Lock) error does not report a malfunction.

You have filled the tank with laundry, turned on the wash, but the machine does not make any sounds, only CL is lit on the display. The fact is that if the lock was set once, then it remains in the next washings, even if the LG washing machine is turned off from the network.

The error will be displayed until it is turned off.

Breakage signs

When your LG machine shows a CL error on the display and you can’t turn it off, that’s a cause for concern. During normal operation, the protection function should be turned on and off by pressing the keys. If this does not happen, a malfunction has occurred.

How to solve the problem

How to fix the situation yourself and remove the blockage?

To clear the CL error, press the key combination on the control panel. It may be different for each LG (LG) model. Here is an example of the most common commands. To activate them, you need to press two buttons together for three seconds:

  • Pre-wash Super rinse.
  • Extra wash Intensive wash.
  • Temperature Option key.

For more information, see the instructions for your LG washing machine. This should help clear the CL error.

Please note that the location of the buttons varies. They can be below, above, or to the left of the display.

Spontaneous activation of blocking

When the lock on the washing machine is turned on by a child during a game or an adult member of the family through negligence, it can be removed in a few seconds. minutes if you have to look for instructions. However, the situation may be different: the blocking mode can turn on spontaneously:

the washing machine turns on, and the lock is already working on it and no key combination turns it off;

the lock turns on during the washing process, and often several times, turns on and off spontaneously, does not react to the actions of the owners;

the user activates the lock, but it is impossible to turn it off. Cl lights up on the washing machine screen all the time, regardless of any actions;

the lock is activated by the user and it even turns off, but only if you press the buttons for several minutes in a row, with different pressing forces, looking for the right angle.

This is more serious and there are two main reasons for this behavior:

The washing machine has completely or partially detached contacts that connect the buttons to the control unit. This happens from old age, from constant being in a humid room, from mechanical damage.

Control box defective. This happens mainly from old age: small parts wear out, contacts break, wires fail.

You can try to cope with both on your own, but for this you will need at least a multimeter and a new control panel, and as a maximum a soldering iron, a good bright lamp and well-developed fine motor skills.

For most people, it is much wiser to go to a master.

Dealing with the child lock on your LG washing machine is easy. The procedure is as follows:

Look for arrows with a smiling baby face on the control panel or look at the instructions. Hold down the indicated buttons and hold for a couple of seconds.

Did it not help or the machine continues to turn on the lock at random moments? Remove the control panel, clean the buttons and check for an open circuit.

Did not help? Contact the master, as the problem is most likely in the control unit.

All LG washing machines have a child lock. this is a very useful function, especially when there is a baby in the house who cannot be explained by age that washing is not a game.

The main thing is to figure out how it turns on, how it turns off and not to worry if sometimes it happens as if by itself. If not on your own, then with the help of a wizard, the problem can be easily solved.

How to block and unblock

Blocking the dashboard from a child is a smart solution. The kid can turn on or stop the washing machine, just by touching it, because the control panel is just at the height of a small child. But for people who have not read the instructions carefully, the Cl message can be an unpleasant surprise.

To disable blocking, you need to press the appropriate key combination. This could be:

super rinse plus pre-wash;

intensive wash and additional rinse;

temperature and one of the setting buttons.

Holding the combination, you need to wait a few seconds. this provokes both turning on and off the mode.

Often, LG washing machines with this function have a special designation of the necessary keys: a smiling child’s face or just a smile, and arrows to both. If there is no marking, you can look at the instructions, in the section in which it is written what the different letters that light up on the screen mean.

Error code CL on LG washing machine

Despite the fact that in almost every article we advise people to read the instructions for the washing machine, they continue to neglect this advice, which causes many problems. One such problem is cl error on LG washing machine. What is this cl error, or maybe it’s not a bug at all? What is this cl code that does not allow working with the control panel, let’s figure it out.

The reasons for the appearance of the code, what does it mean?

The cl code on the LG washing machine is not an error code at all, but a so-called information code that tells the user that the control panel lock mode is on or simply “child protection”. The developers of automatic front-loading washing machines were almost immediately puzzled by the problem of the need to lock, since the control panel of such machines is very low, in the reach of small children, which is very dangerous.

Note! The cl code is, in fact, a short designation of the English word “children”, which translates into Russian as “children”.

A child can easily not only stop the washing process by pressing a few buttons, but also ruin the washing machine, so if you have a small child in your house, do not forget to use this function. So, cl on an LG typewriter is an information code and if it appears after pressing a key combination, this is normal. But what to do if this code is always displayed after turning on the washing machine or even worse, appears suddenly in the middle of the wash, although no one pressed anything, but let’s not get ahead of ourselves.

How to put / remove a lock, lock options?

Almost all modern models of automatic washing machines from LG have a child lock, and the key combination that makes this lock is the same. Namely super rinse plus pre-wash. The location of the keys differs from model to machine. They can stand:

  • to the left of the display;
  • above the display;
  • under the display.

The essence of this does not change. pressing two keys super rinse plus prewash simultaneously with holding for 3 seconds, activates the “child protection” mode, and the mode is also turned off.

READ  Washing Machine Samsung Error De Which Means

It is quite difficult to mix up the buttons. The manufacturer took care of this by putting a legend on the control panel. In particular, the “childproof” keys are indicated by a smiling lock, from which there are two curved lines pointing exactly to these buttons.

After setting the cl mode, it remains until the end of the wash. When the washing process is completed on some LG machines, the child lock is reset, and on some it is retained even if the machine is turned off. In some models of LG washing machines, all buttons can be locked from children, and on some all buttons except on / off.

This baffles consumers who have purchased cars with a partial lock. After all, a child can ruin the wash by pressing the on / off button. Then what’s the point, in blocking at all, if the child is still able to influence the washing machine? over, this problem is typical for expensive machines, stuffed with different functions, and the more complex the machine, the more “tender” its control module. Its sudden shutdown during the washing process can damage the microprocessor, and then an error can definitely occur.

Important! If in your model of LG typewriter, the control panel should be locked completely and this is written in the operating instructions, but in fact everything is locked except for the on / off button, this may indicate a malfunction of the control module.

The blocking occurs spontaneously and does not turn off

If your LG machine is in good working order, it will not be difficult to turn on and off the child lock mode. But what to do if, when you turn on the washing machine, cl is lit on the display, and you cannot unlock the machine by pressing the keys, how long do you press. is this an error? In essence, there may be several options for this malfunction.

  • The cl lock spontaneously activates after the washing machine is plugged in and does not turn off; accordingly, it is impossible to set the washing program.
  • The cl lock is activated spontaneously during the wash process (e.g. at the end of the wash before rinsing).
  • The cl lock is activated by the user, but not disabled or disabled every other time.

In this case, you need to either contact the service for help, or try to repair the LG car yourself. For self-repair, you will have to disassemble the washing machine by dismantling the control module. Then you will need to take a multimeter to ring the contacts of the super rinse and prewash buttons, as well as the on / off buttons. The most common causes of the above malfunctions are oxidized button contacts, frayed wires or defects in the control module board.

Important! If, after checking the electrician, you are convinced that the problem is precisely in the control module board, contact the specialists. It is better not to repair this part yourself.

Note, if the display of your LG washing machine shows cl, and the control panel does not work, do not rush to panic. In this case, this is not an error, just your machine is locked from children and you need to unlock the lock by simultaneously pressing the super rinse and prewash keys. Only if the lock is not removed, we can talk about a malfunction.

How to recognize lock buttons

The manufacturer marks the buttons either with the baby’s face on the panel, or with a lock with a smile.

It is important that the “protection” works differently for different LG Washing machine models. The panel with the keys can be locked completely or partially. At the same time, the On / Off button remains active, which is not always convenient, because if during the work the child suddenly turns off the machine, the electronic controller may suffer.

What does CL code mean

If the LG washing machine writes the CL error, this does not mean a breakdown. This code informs the owner that the Child Lock mode is on. Therefore, the panel with buttons is locked, which prevents pressing the keys during washing.

Small children can either rearrange the program, turn off the wash, or break L.G.’s car. Multifunctional appliances are equipped with many functions, so its panel is too sensitive and prone to breakage. For this, a security code is provided.

Why does the code appear

As we said, the CL (Child Lock) error does not report a malfunction.

You have filled the tank with laundry, turned on the wash, but the machine does not make any sounds, only CL is lit on the display. The fact is that if the lock was set once, then it remains in the next washings, even if the LG washing machine is turned off from the network.

The error will be displayed until it is turned off.

Breakage signs

When your LG machine shows a CL error on the display and you can’t turn it off, that’s a cause for concern. During normal operation, the protection function should be turned on and off by pressing the keys. If this does not happen, a malfunction has occurred.

How to solve the problem

How to fix the situation yourself and remove the blockage?

To clear the CL error, press the key combination on the control panel. It may be different for each LG (LG) model. Here is an example of the most common commands. To activate them, you need to press two buttons together for three seconds:

  • Pre-wash Super rinse.
  • Extra wash Intensive wash.
  • Temperature Option key.

For more information, see the instructions for your LG washing machine. This should help clear the CL error.

Please note that the location of the buttons varies. They can be below, above, or to the left of the display.

CL error in LG washing machines

LG washing machines display not only error codes, but also informational messages. To recognize this message, you must carefully read the operating instructions.

If your Washing machine shows CL error on the display and you cannot set the washing mode, do not worry. Let’s see what this means.

What to do if you notice signs of a problem

  • You cannot set the washing mode, the machine generates a CL error code immediately after turning on. Even after disconnecting the plug from the outlet, the error does not reset.
  • The machine is washing normally, but in the middle of the program a fault code pops up.
  • You connected the lock yourself, but then the mode does not turn off or does it intermittently.

What to do in this case? It is necessary to check the control unit with a multimeter, for this it is necessary to disassemble the front panel. Then pull out the unit and call the tester.

Additionally, check the key contacts that may have oxidized over time. Also inspect control unit wiring, connections, connectors.

If the control board malfunctions, you need to replace it yourself or contact the service center.

CL error on LG washing machine: causes and remedies

If the CL error code appears on the display of your LG washing machine, it can be confusing. The reason for this is the lack of information on this encryption in the operating instructions. But in fact, the CL code is not an error, but a function to enable child protection. When it is activated, the entire working panel of the washing machine seems to freeze, not a single key responds to pressing. The problem arises when you need to unlock the work panel, because this information is not in the documents.

What does CL error mean?

Like any home appliance, the LG washing machine is equipped with an individual system that is responsible for the mechanical and electronic work processes. When the device is turned on, the start information appears on the display, after which you can set the desired operating mode. However, during operation, information about an error in the form of an encrypted code with alphabetic and numeric values ​​may appear on the electronic display of the washing machine.

A table with fault codes is present in the instructions for each model of the washing machine. The reasons for their occurrence and troubleshooting are also described there.

It will be a problem if the CL code lights up on the display, because there is no information on this issue in the instructions.

So the CL code is not a system error. This is a very important option of the washing machine, which a person learns about only during operation. This code is an abbreviation of the English child lock, which translates as “child protection”. When this function is enabled, the washing machine control panel is locked, with the exception of the “Start” button. And the screen shows the code cipher. Thanks to this function, you do not have to worry that the child will change the program or stop washing during the washing machine.

It is just not clear how this function was enabled. But the rebus is easy to solve. When setting a washing program, the owner of the washing machine accidentally presses several buttons at the same time. And after that, having figured out this function, he regularly uses it. And if the display shows the literal value CL, you should not worry. this is not an error, but an informational alert.

What to do?

Most LG washing machines are childproof. The combination of buttons for each device is unchanged. Only the arrangement of the buttons on the operating panel is different. In one washing machine, they can be located on the left side of the display, in another. above the display, and in a third. below the display.

So, in order to activate the child lock function, you must press the “Super Rinse” and “Pre-wash” buttons for 3-4 seconds. As soon as the letters CL appear on the display screen, you can release the buttons. Disabling this function occurs in a similar system.

This information is not included in the operating instructions for the washing machine. However, the manufacturer tried to tell its owner about the presence of this function by means of drawings on the work panel. A close examination of the drawn icons near the display of the washing machine, you can see the lock with a smile.

Two lines depart from it, heading to the necessary buttons.

When the protection function is activated, the CL code appears on the display. The child will not be able to turn off the protection, and there is no need to worry that the operating mode will be changed. However, owners of LG washing machines should check this feature in advance. In some models, the lock completely locks the operating panel. In others, the on / off button remains active. At the end of the washing process, in some models, the child lock function turns off automatically, in others, you will have to re-clamp the necessary buttons.

Manufacturers advise consumers to think in advance about the full and partial blocking of the working panel of the washing machine. In models where the “on / off” button remains active, in principle, there is not much point, because the child in any case can affect the washing. As a rule, devices with partial protection are filled with many useful functions and programs that every housewife needs. Such washing machines have a very delicate control module, and if you constantly press the “on / off” button, the microprocessor may fail, for the repair of which you will need to call the master.

READ  Why The Washing Machine Makes A Lot Of Noise When Spinning

LG’s latest washing machine models already boast information on the childproof function in the manual. And here the consumer needs to take seriously checking the locking of the working panel. If the documents indicate that the panel is completely locked, but in fact the “on / off” button remains active, it means that the control module of this washing machine is out of order.

Having dealt with the issue of enabling the CL function by the owner of the washing machine, you should consider the issue of spontaneous activation of the child protection mode.

Unfortunately, this also happens, and few know how to deal with this problem.

Some owners have experienced spontaneous activation of the child lock function. When the washing machines were switched on, the letters CL were displayed. And pressing the buttons to disable this function did not help. Accordingly, it was not possible to install the program and start the washing machine. For other users, the child lock was spontaneously activated during the wash process. Still others turned on CL themselves, but could no longer remove the protection. All the cases presented indicate a failure of the washing machine system.

The safest, but very costly, will be to call a repairman for household appliances. However, you can try to fix the problem yourself. To do this, you will need to disassemble the body of the washing machine, carefully dismantle the control module. Using a multimeter, ring all contacts, paying particular attention to the “Super Rinse”, “Prewash” buttons and the “On / Off” button. Quite often, the cause of the malfunction is the oxidized wires of these buttons. In this case, each wire will have to be disconnected, cleaned and returned to the required position. It is much more difficult if all contacts were good. This means that the cause of the malfunction is hidden in the control module. But without experience with this part of the washing machine, it is best to contact a qualified technician.

Tips

Understanding the complexity of the washing machine system, many users are still fixing its problems on their own. In turn, home appliance repairmen are ready to share useful tips.

  • Before proceeding with the disassembly of the washing machine case, you must disconnect it from the network.
  • Be sure to check if all the water is drained from the drum.
  • From the outside, wipe the washing machine with a dry cloth to avoid close contact with moisture when working with the electronics of the device.
  • After dismantling the control module, you must carefully inspect the wires.
  • If oxidation is detected, disconnect the wire, carefully strip it, and then return to its original position.
  • The next step is to check the work. But for this you have to return the control module to the washing machine body.

If the child lock was disabled, then the repair was successful. Otherwise, you will have to contact the service center to identify and troubleshoot.

What does CL error mean on LG washing machine, see below.

Spontaneous activation of blocking

In the vast majority of cases, the appearance of this information message does not portend a problem, but there is a situation when CL on the display is a sign of a control panel malfunction. Possible symptoms:

  • the machine is locked immediately after turning on the power, and does not react to any actions of the owner, turning off and turning on the power does not help,
  • the lock turns on during the wash process, it can be periodically turned off and on again,
  • the lock is activated by the user, but the lock cannot be released.

Sometimes it happens that the lock can be removed, but for this you have to press the buttons with an offset “catch” the contact. For any of the listed cases, repairs will be required, associated with a partial disassembly of the washing machine. What to do in such a situation, call the master or try to fix the car yourself. it’s up to the owner to decide.

When planning to repair a washing machine yourself, it is important to understand that the machine is a complex device, inept actions can lead to even more serious damage. You should not undertake repairs without experience in such work, just as you should not disassemble a device that has not expired the warranty period. An attempt to repair yourself will certainly entail a loss of warranty.

If you have experience and confidence in the result, you need to start with disassembling the machine. The exact aLGorithm of work differs depending on the specific model; the instructions are easy to find on the Internet. It will be much easier to work if you first look at the topic. Particular attention should be paid to the part of it that tells how to remove the control panel. In most cases, disassembly is performed in the following sequence.

  • The top cover is removed. It is mounted on two bolts at the back of the car.
  • The dispenser is removed. As a rule, it is held by a simple latch. To pull it out, just click on the designated point in the middle of the tray.
  • The control panel can be removed. It is secured with several bolts.

A panel with buttons is separated from the control module. It is important to be extremely careful not to damage conductors and connectors.

Random blocking

Due to the fact that the lock is turned on very simply, it can be activated involuntarily, sometimes the children themselves turn on the child lock. Do not panic, and even more so try to de-energize the device. Just press “Super Rinse” and “Prewash”, the CL fault will disappear immediately, the machine will be unlocked again.

CL error on the indicator, what is it

If the washing machine gives a CL error, do not panic, nothing bad happened, just the child protection mode was activated. Actually, the abbreviation CL stands for Child Lock. It is unlikely that anyone will have a question why such a lock is needed. It’s simple. the control panel is located at the height of the child, and the machine tries to protect itself from accidental clicks, and the consequences that may arise from them.

As you might guess, most often the appearance of this error code on the indicator is a consequence of the actions of the owner of the car, occasionally involuntary, but there are times when this message appears spontaneously, even at the most inopportune moment. If the message is not the result of conscious human actions, repairs are indispensable.

What does CL error mean in LG washing machine

It often happens that the appearance of a message on the display of the washing machine terrifies the owners. Immediately there is a desire to turn off the device, call friends, call the master. It is not difficult to get rid of the fear of the car, you just need to carefully study the instructions and understand that far from everything that appears on the display is an error code. A prime example is the CL error in the LG washing machine. This message is for informational purposes only and most often does not require any action from the user.

How to lock and unlock a car

Without exception, all modern LG automatic washing machines have a childproof function. Regardless of the model, this mode is activated by pressing two buttons. These are: Super Rinse and Pre-wash. For different models, these buttons are located in different parts of the panel. They can be below the display, above it, to the left of it. It’s easy to find the buttons you need, they are connected by a thin line, interrupted by a smiling lock.

The procedure for enabling and disabling the blocking is not particularly complicated. You just need to simultaneously press these two buttons and hold for 3 seconds. As a result of such actions, the child lock will turn on or off. Different models of LG washing machines are blocked in different ways. Some turn off all buttons without exception, others all except the on (off) button. In any case, the panel is locked, CL lights up on the indicator.

Perhaps, the complete blocking system is preferable, because no one guarantees that the child will not accidentally press the shutdown button, thereby interrupting the washing procedure. It should be noted here that a sudden power outage during the execution of the program can cause damage to the parts of the control module.

Cleaning contacts

Since the washing machine is an electrical appliance that works in conditions far from ideal, the first thing you should pay attention to is the state of the connections. Often the cause of poor button operation is the oxidation of the pads or contact bounce. The question of how to remove the cause of the malfunction is solved simply. In the first case, it is necessary to clean the pads, rinse them with alcohol, in the second, you cannot do without replacing the button itself.

A multimeter will help to test the condition of the connecting wires, buttons and contact pads. Using the switch, it is transferred to the resistance measurement mode, the presence of electrical connection between the button and the board is checked in the closed and open state.

Control module malfunction

Most often, the cause of a malfunction is poor contact or violation of the integrity of the conductors, but it also happens in a different way. If the panel is checked, the contacts are clean, there are no breaks, and the indicator still shows CL, the cause of the malfunction is the components of the machine control circuit.

The control module is the brain of an automatic washing machine and you should not try to repair it yourself. It would be more correct to call the master at home or take the car to the workshop. There is an opinion that only the module itself can be taken away, it will be tested, a malfunction will be identified and the failed parts will be replaced. This is wrong, it would be wiser to take the entire device away. This approach will facilitate the work of the master and provide the desired result.

An automatic washing machine is a device that is designed to save a person from unnecessary labor. She not only erases, but also tries to inform the owner about her actions. The user can only understand what this or that code on the display means. This is not difficult, if a message appears, you should not panic, you just need to look at the instructions and there will be much less reasons for concern.

How to clean contacts yourself?

If you have some knowledge of working with electronics, you can start fixing household appliances yourself. The first thing you should pay attention to in this case is cleaning the contacts. It is traditionally carried out in the following order:

READ  Washing Machine Errors Bosch Serie 6

It is quite simple to fix minor problems on your own, the main thing is to figure out what the reason is, and to remain perseverant. If you have any questions, you can always contact the service center and get comprehensive support. As a rule, such events are inexpensive.

Causes of error CL

The developers of LG devices with front-loading, in order to avoid the influence of children on the washing process, and vice versa, were puzzled by this problem for a reason: after all, the control panel of the device is located very low, which is very dangerous for the youngest households. In addition, the child can not only stop the washing process, but also ruin the washing machine. Therefore, this function will be really necessary.

How to turn on (turn off) the lock of the washing machine?

Locking the dashboard from a child is a rational solution. The fact is that the baby, by pressing the button, can stop the process by barely touching it. After all, the control panel has a convenient location for him. If a person starts to erase without reading the instructions beforehand, the appearance of such a code may turn into an unpleasant surprise for him.

To remove the lock button, you must press and then hold for some time two buttons marked with a picture of “nipple” or an infant’s face. The buttons may differ depending on the specific model. As a rule, we are talking about the following keys:

  • super rinse;
  • preliminary washing process;
  • intensive wash;
  • auxiliary rinse;
  • temperature;
  • options (at least one of the buttons provided).

For models equipped with touch controls, in order to unlock the lock, you must hold down one of the keys related to the main functions for three or four seconds. For example, it can be a button with an asterisk or “Delayed wash”, “No wrinkles”.

What does CL error mean in LG washing machine

Despite the fact that each washing machine comes with an instruction manual, many people neglect it and ignore the rules for using the device. This, in turn, leads to numerous problems. One of them is the occurrence of the error “CL” on the washing machine from LG.

Decoding the code

This code indicates the activation of the lock from small children option, in English it sounds like “child lock”. The mode in question is involved in the process of blocking absolutely all keys, except for the power supply. The point is to protect the unit from accidental button presses by children. So the appearance of this code is more a system message than a serious error.

Who will benefit from the washing equipment lock mode?

This option is suitable for people who have an active child or several children at once. You can easily turn it on, turn it off too. It is enough just to simultaneously press two buttons, which are marked with the “nipple” icon, and hold them for several seconds.

You can activate the mode in question directly during the wash process, after which a corresponding notification will appear on the screen. When the process ends, the function will continue to be active, so before starting the next cycle, you need to deactivate it.

Useful tips for repairing washing equipment

There are several common breakdowns that you can repair yourself. They are determined on the basis of specific features:

  • If the panel is locked and the CL indication light makes itself felt, you should carefully read the instructions. The fact is that this model is characterized by a large number of problems with blocking, and even after the end of the working program, the device does not unlock. All you need to do is press the Super Rinse button again.
  • If the machine locks this panel, or during the end of the work program there is no way to unlock the lock, we are talking about the need to dismantle the control module. You will also need to ring the contacts of the buttons using a multimeter, because they are responsible for blocking. They need to be cleaned thoroughly.

If you are not confident in your own abilities and possessing technical skills, you should contact the service center, where specialists with a high level of qualifications work.

What to do if the control unit is faulty?

The cause of this error may be a breakdown of the control module. This often happens due to a malfunction or poor contact of the conductors, problems of their integrity. Although often the reasons may be different. If the panel is checked, the contacts are good, there are no breaks, and the indicator still “fails”, the control circuit elements are probably broken.

It is nothing more than the brain of the entire unit, so carrying out repairs on an independent basis is unacceptable. The easiest and most expedient way is to organize a master’s visit to the house or take the machine to the workshop. It is widely believed among owners of washing equipment that only the module can be removed. As a result, it will be tested and repaired or replaced (at least some parts). This approach is incorrect, and it is recommended to diagnose the entire device, which will simplify and speed up the wizard.

An automatic washing machine is a device that can reduce the human labor required to perform work such as washing. This type of equipment can not only wash, but also rinse, wring out the laundry, and also inform the owner about the main processes taking place inside the unit. Therefore, each code has its own encryption, and it is not difficult to determine it. It is also not recommended to panic, it is best to look at the instruction manual or contact the service center.

The washing machine locks up spontaneously and does not turn off

If there is no special lock, and the error is still displayed on the scoreboard, it will not work to unlock using the keys. There are three cases in which you can see the designated code:

  • immediately after connecting the equipment to the electrical network in order to avoid choosing the washing option;
  • during operation in case of a mode change (switching from rinsing to spinning);
  • blocking of the washing unit by the user and the impossibility of eliminating (turning off) the code.

In all these situations, a comprehensive repair of the device is needed. It is even advisable to contact the service center or try to fix the malfunction on your own. But when choosing the second method, possession of certain knowledge and skills is required.

Failure during washing

In a standard cycle, the LG washing machine completes the rinsing process, drains the water and enters the spin mode, but it either simply turns the drum, which does not pick up speed, or stops and automatically ends the washing program. Each device model of this brand has its own characteristics, which manifest themselves in different ways, including during failures.

If there is a problem with the balancing of the drum, the letters UE or uE appear on the display, all spin indicators and LEDs 1 to 6 light up simultaneously.

What does the UE error mean on LG washing machine

Many owners of LG automatic washing machines have already noted the appearance of the UE error during the washing process: it appears due to the impossibility of performing a spin cycle due to imbalances in the drum balance. The reasons may also be different, it all depends on the life of the device and compliance with the rules of work and care of the machine. Not everyone knows what exactly needs to be done in such cases, and what actions should be taken before the arrival of specialists, if the machine consistently produces such an error. Let’s try to consider this issue in more detail.

How to decode the error correctly

Not all owners of LG washing machines know exactly what the letters UE can mean and why they signal two different errors.

  • The uE coding with a small letter u means that the machine has detected an imbalance during operation, in this case the device will eliminate the problem automatically by adding water and more even distribution of the laundry.
  • The designation UE already indicates that the machine is not able to solve the problem on its own, and now you need to find out its cause.

It is worth noting the frequency of occurrence of such an error: if it appears on the display only occasionally, then the washing machine is most likely all right, but if the UE symbols appear during each wash cycle, you must contact a specialist.

Causes of errors

LG washing machine may issue UE error codes for the following reasons:

  • accelerated wear of running parts due to excess weight of the laundry during washing;
  • when loading a large number of bulky items or, conversely, with too little load;
  • an error while executing a certain program;
  • if the car is not level;
  • breakage of units as a result of wear associated with the age of the machine.

Procedure for solving the problem yourself

As mentioned above, you should distinguish between two error codes that the machine produces: “uE” and “UE”. The first code more often means a crash in a program or runtime. The machine has automatic mechanisms for regulating such problems, and they are solved without the participation of the user. If the UE code is written, the following manipulations must be done.

  • It is necessary to open the hatch door, remove the laundry from the machine. If the front-loading machine does not drain the water, you must be prepared for such a situation (open the door by substituting the pallet). often the machines drain the water themselves, before starting the spin.
  • If the problem arose due to the fact that the laundry formed a knot, or, as often happens, all the garments got into one of them, the things must be untangled and evenly distributed over the drum. If there is too much laundry, it is better to remove some of it. If the quantity is small, it is necessary to reload the drum.
  • If the vibration level exceeds a certain threshold, the machine generates this error. This can happen not only because of the imbalance created by the lump of laundry, but also because of the machine itself, which is unstably installed. It must be leveled, while all the legs must rest on the floor with their full surface. If the problem occurs regularly, an anti-vibration mat or anti-slip feet can be a lifesaver.

It is very important to level the washing machine

It so happens that none of the actions solve the problem. You can try to reboot the machine’s software. To do this, disconnect it from the network for 15-20 minutes, then turn it back on. To end the cycle that was started in the machine, you should select the “spin” mode.

Problems with which you need to contact the service

The UE error code often signals a problem that you can fix yourself, as described above. However, there are situations that require the participation of a specialist, for example, a breakdown of a machine unit.

Below is a table of possible reasons for the UE error code on the display.