Washing Machine LG Does Not Spin Laundry Reasons

The laundry is not well sprung after the end of the wash

The machine has completed the washing process, but the clothes are still wet. this is a common reason why users of household appliances turn to specialized service centers. Let’s figure out why the spin does not work to the full. The most common problem is clogging of the drain filter or pipes with dirt or small debris. The slags do not allow the liquid to pass, due to which the water partially remains in the drum. In this case, the laundry will be wet or poorly wrung out.

Washing Machine LG Does Not Spin Laundry Reasons

Malfunction of the electric motor. With various breakdowns, the motor can function intermittently, without giving out the standard power. In this case, the machine will wash the clothes, but will not wring them out. The fact is that the centrifuge mode requires a significant increase in the number of drum revolutions. If the engine is defective, it will not be able to fully perform this task and the laundry will remain wet.

A rare problem is the failure of the control unit. Such a malfunction leads to incorrect operation of the automatic machine. In this case, the washing unit may freeze during the spin cycle or not spin the laundry at all.

You can fix most of the existing problems yourself. Here’s how to do it.

Spin does not work at all

If the washing machine does not wring out the laundry, do not be upset. The problem does not always lie in the breakdown of the mechanical or electronic components of the unit. Mistresses often make mistakes themselves when operating equipment, which is why it begins to malfunction.

  • Too many items are loaded into the drum. Please note that each model of the washing machine is accompanied by an instruction, which contains information on the maximum permissible load. If the norm is exceeded, a special sensor will block the spin function due to malfunctions of the motor.
  • Incorrect mode selected. Some models of washing machines do not spin the laundry for hand and delicate washing. If one of these modes is selected, the user will take out wet laundry from the drum after washing.
  • Accidentally pressed “no spin” button.
  • Too few items are loaded in the drum. Because of this, an imbalance may occur and the machine will freeze during the spin phase.

Spinning may not work at all if the pump breaks down. If the drum is spinning in centrifuge mode, but things remain wet, most likely the pump that is responsible for pumping out water is faulty.

Why LG washing machine won’t spin and how to troubleshoot?

The washing machine is a “helper” that saves the hostess’s energy and her time for washing things. Many manufacturers offer such household appliances, but the consumer is especially fond of LG brand devices: they are famous for their durability. However, any technique breaks down or malfunctions over time. A common malfunction is the “refusal” of the machine to wring out things. We will figure out what to do in this case and how to fix this problem.

Features of the design of the automatic machine

Like other washers, LG machines have a body that includes a back and front panels, a cover and a bottom. A hatch is provided on any device. The most popular and demanded are front models, in which the door is located on the front of the panel. Products with a top hatch are less common.

On the front of the case there is a control panel with display and buttons. With it, you can switch programs and select an operating mode.

Next to the panel there is a tray for loading powder and a conditioning agent (also called a powder receptacle). The bottom of the hull is equipped with a technical hatch with a provided waste filter and an emergency hose. The automatic machine also has a cord for operation from a 220 V network and 2 hoses.

The internal structure of technology is much more complicated. It includes electronics (sensors, wiring), complex mechanisms, gaskets. Consider the main elements of an automatic machine.

  • Electronic board. This is the “brain” of the appliance, coordinating the functioning of the washing unit.
  • Inlet valve. Visually it is a plastic box with 1 or 2 coils. When voltage is applied, the membrane opens, due to which water is collected into the drum.
  • Motor. Recently, LG has been producing models equipped with a direct drive motor. There is no belt drive in such motors. In older models, collector motors are installed. they have a belt that stretches during intensive use, often flies or breaks.
  • Tubular Heater. With the help of this element, the water in the tank is heated to the set temperature provided by the program.
  • A pump or pump designed to pump water from a tank.
  • Damping elements that reduce vibration during washing and spinning.

Regardless of the appearance of the models, automatic machines may not wring out things for the same reasons. Here are the most common ones.

Common causes of malfunction

Most of the reasons can be dealt with on your own, without calling a professional master.

The machine starts the program and hangs

Situations in which the machine washes-erases and stops halfway are common. Often, users are faced with a problem in which the machine washed the laundry, and when starting the spin program, it suddenly hung up. There are several reasons for this malfunction.

  • Breakage of the laundry balance sensor. This electronic part is included in the new generation washing machines. It is absent in outdated models. If the sensor fails, the board will not receive a corresponding signal, which is why the machine will not start spinning in order to prevent strong vibrations.
  • Failure of the depreciation system. Due to damaged shock absorbers, many models of modern automatic machines are able to “slow down” the push-up process so that other mechanisms and electronic components do not fail.
  • Damage to the tachometer. This electronics is responsible for high-speed control of the drum rotation. If the tachometer is broken, the board will not be able to “determine” the number of rotations and will stop the machine.
  • Faulty water level sensor (pressure switch). In the event of such a breakdown, water may remain in the drum, and the device will not be able to recognize it. As a result, the automatic machine may freeze between rinsing and spinning.

The machine also often “hangs” during the spin cycle in case of malfunctions in the control electronics. Such malfunctions lead to incorrect operation of the appliance, for example, it may freeze when washing, rinsing or spinning.

How to fix the problem?

What to do if the LG machine stops spinning the washed laundry. this question is often asked by those who have removed wet things from the drum for the first time or have already repeatedly. Before making a diagnosis, you should perform a number of actions.

  • It is necessary to pay attention to the selected mode. perhaps spinning is not provided in it. In this case, you must select “Spin” and set the desired number of revolutions.
  • Check if the washing machine is overloaded. If a lot of things are thrown into the drum, the device will try to spin the drum several times, but if the motor is heavily loaded, it will stop every time. You need to get out the excess laundry, evenly distribute the remaining items on the drum and activate the “Spin”.

If, after the actions taken, the machine still does not wring out, you should proceed with the diagnosis. First of all, you need to check the filters and pipes for contamination. To do this, it is recommended to unscrew the drain valve and clean it. Carefully inspect the drain hose and branch pipe and clean if they are clogged. After that, all the parts are installed in place, and the operability of the machine is checked.

If the problem persists, you need to check the attachment of the tachometer. if loose, tighten it. Experts recommend paying attention to the wiring and contacts. if necessary, they need to be cleaned and additional insulation made.

The automatic machine often cannot cope with spinning the laundry when the brushes are worn out in the engine. To eliminate the malfunction, disconnect the device from the power supply and disassemble the case. Disconnect the wires, belt from the electric motor. After that, the engine is removed, and you can check the tachometer, brushes, just in case, ring the coils. When you find faulty units, they should be replaced with new ones.

The biggest problem is the breakdown of the electronic module. Some models of washing machines have a diagnostic mode. To activate it, press the Spin and Temp buttons at once. After starting the diagnostics, “Start” is selected and the device will enter the spin mode. Lack of RPM will indicate a malfunction of the board. You will not be able to fix it yourself. for this you need special diagnostic equipment and tools. Unfortunately, the elimination of such a malfunction is expensive.

Why the washing machine does not spin, see below.

Initial actions

Iitak, you are not satisfied with the spin quality of your washing raspberry. Well, it is quite possible to eliminate the causes of this behavior on your own, if they are not very serious. You should still be prepared for the fact that the help of a master may be required. Take action step by step.

  • If you are not sure you have not exceeded the load capacity, remove about half of the laundry from the drum. Next, start the spin again and see what happens.
  • The situation has not changed? Then inspect the drain devices and clean them. Probably the aisles just got clogged.
  • Try to understand if there is any foreign object interfering with the washing process. If found, do your best to retrieve it.
  • In the future, wash clothes made of coarse fabrics separately at high speeds.
  • For the well-coordinated operation of the washing machine, a balance is required inside the drum. This is why it is not recommended to wash heavy items separately. Add some very easy ones for balance.
READ  Drum Cleaning Washing Machine LG Direct Drive

Important! If the problem was not found in the course of the above steps, it may be deeply hidden somewhere. You can’t do without dismantling the machine. Inspect for damage to Tubular Heater, pump, engine. If you find a breakdown, remove the part and replace it with a new one, as it is expensive to repair them.

Why LG washing machine does not spin laundry well?

Even with seemingly completely serviceable machines, incidents sometimes happen that do not affect the main functions, but the hostess is given certain troubles. For example, the LG washing machine does not spin things well. over, this happens not once or twice, but relatively regularly. Well, the reasons for this can be very different, and some of them are not particularly serious, it is not difficult to eliminate them yourself.

Because of what the spin is unsatisfactory?

Spinning is one of the main tasks of any washing machine, because it is physically quite difficult for the hostess to manually produce it, and this activity requires significant time costs. The situation is aggravated by the fact that it is impossible to control how well the washing machine squeezes out the laundry during the operation process. As a result, nothing can be done. The failure to perform this function is primarily influenced by a number of factors.

  • Incorrect assembly. This is the case when you encounter a poor spin from the very first wash.
  • The weight of the laundry in the drum is too high. Thus, the unit simply cannot cope with the load.
  • You have switched on a program that is automatically programmed for low spin speeds.
  • The density of things loaded into the machine is different. In such situations, most often only part of the laundry remains poorly wrung out.
  • Water remains in the drum after the wash process is complete. This happens because the drain hose is clogged and does not release water from the tank, which leads to stagnation. Even well-wrung laundry will get wet again from residual moisture.
  • A foreign object (coin or button) is stuck between the drum and the tank, which now interferes with the smooth functioning of the unit. Also, the reason for the poor spinning of the laundry can lie in the wear of some elements (most often these are bearings, but there may be something else). So, this problem is evidenced by extraneous noise during washing.
  • The tachometer is out of order. This situation occurs if you regularly add more laundry than intended.
  • Faults in the pump. A damaged pump can signal itself in different ways, so it’s impossible to say for sure whether it is working properly or not. The best option is to check it in person and then decide if repair is needed.

Well, and where without the broadest problem. the failure of the electronic module? After all, the “brain” of the machine is responsible for all its actions, and if something is wrong in it, absolutely any function of the unit can suffer.

Service the equipment on time

Contrary to the beliefs of manufacturers, many users simply neglect the rules for using the washing machine. Hence all the ensuing consequences.

For example, you should carefully inspect the drum and s of things for the presence of foreign objects. This is especially true for families with small children. An element that gets inside the washing machine will invariably disable it. In addition, there is no need to select programs by “typing”. If you wash your duvet on a delicate cycle, the result will be disgusting for both the washer and the item. As for small wardrobe items, they are washed in special rag bags.!

Why is all this necessary? The more carefully you treat your home assistant, the longer she will serve you.

The washing machine does not spin the laundry: why the spin does not work?

The washing machine is an indispensable assistant in the house. The washing process consists of several stages, and for an excellent result, each of them must be done with high quality. However, the technique does not always work as we would like. One of the most common malfunctions is that the spinning does not work in the washing machine.

The malfunction can have various reasons: from violation of operating rules to serious damage to internal mechanisms. The article discusses in detail the sources of the problem, as well as ways to solve them.

What to do if the spin does not work

Choosing the right program. Perhaps the machine has selected a program that does not include spinning, for example, for washing woolen or silk items, “Gentle care”, etc. You can check this using the instructions, which describe each mode in detail. If the spinning program is not provided for in the program you have set, start another one or after the end of the wash, enable this function separately.

If you wash clothes made of delicate fabrics and have chosen a special mode for this, it is not recommended to add the spin function separately. this can ruin things.

There are situations when the spin function is included in the program, but the unit still completes the cycle, leaving the laundry wet. Perhaps you pressed the function deactivation button before starting the washing process, after which the machine stopped spinning. In this case, just change the settings. These problems do not indicate a breakdown of the unit and are most often caused by the user’s carelessness.

We restore balance and get rid of overload. If the LG washing machine does not spin, and at the same time the tank is overfilled with laundry, then it will report the overload with an error code displayed on the display. Many modern units, for example, manufactured by Indesit, Samsung or Bosch, have an imbalance detection function.

If things are unevenly distributed over the drum, tangled in one lump, or there are too many of them, the machine often refuses to spin. The unit will make several attempts to spin the drum, and if they are unsuccessful, it will complete the wash cycle without wringing out the laundry. To solve the problem, it is enough to distribute wet clothes by hand or remove unnecessary things, and then restart the wash.

We establish a drain. Before spinning, the unit must completely drain the water from the tank through the drain system. Therefore, when the system does not drain the water, the machine cannot wring out the laundry. First, take out the drain filter and clean it of any dirt. Also check the drain hose and the pipe that connects the tank to the pump for blockages. It happens that the pump fails, then it needs to be repaired or replaced. After removing all dirt and malfunctions, start the spin function again. If the drain does not work and the laundry remains wet, then the cause of the malfunction must be looked for elsewhere.

We fix the tachogenerator. Damage to the tachometer occurs in washing machines (for example, brands ARDO, Whirlpool, Candy, Atlant, LG or Zanussi) due to frequent drum overloads. If you consistently exceed the manufacturer’s specified loading rate, this element can quickly fail. A tachogenerator is installed on the motor shaft and is designed to control the number of revolutions during washing. If the sensor breaks down, the washing machine will not be able to calculate the drum speed and set the correct spin speed.

Another reason for the malfunctioning of the tachometer is the weakening of the contacts and wires that lead to this part. To diagnose the malfunction, check the fasteners and tighten them if necessary. If the wiring or adjacent contacts failed, you must strip them and seal them with electrical tape. In the event of a malfunction of the tachogenerator itself, the part is repaired or replaced.

We repair the engine. If a conventional belt-driven motor is not installed in the washing machine, the brushes will gradually wear out, which causes a problem with spinning. If the engine does not work well, the drum cannot pick up the number of revolutions required for the final wash stage.

If you are familiar with mechanics, you can try to fix the problem yourself. It is necessary to dismantle the rear wall of the case, then remove the belt from the motor and disconnect the wires, and then unscrew the engine itself from the tank. During diagnostics, you can identify faulty motor parts and replace them with new ones.

Checking the control module. This element is responsible for the operation of all programs, including spinning. If you have already ruled out all of the above options for problems, most likely, the spinning cannot be started due to a module breakdown. Unfortunately, you will hardly be able to check the control unit at home; you will have to contact a specialist. Replacing a part will be quite expensive, so it is better to find a professional technician whom you can entrust to repair the device.

If the washing machine does not spin, this is not a reason to write it off. We hope that in the article you will find answers to your questions and can quickly fix the problem.

Possible reasons

Often, the lack of spinning does not affect the rest of the functions: the automatic machine continues to wash and rinse the laundry properly, but after the end of the cycle, the contents of the drum remain wet. If the washing machine does not spin, the reasons may be as follows:

  • incorrectly selected program;
  • overload or imbalance of the drum;
  • lack of drain;
  • breakdown of the tachometer;
  • wear of engine parts;
  • problems with the control unit.

Depending on the situation, you can restore spinning in the washing machine both at home and in a service center. Further we will take a closer look at each problem and ways to solve it.

From the following story, you will learn how to restore the spin if one of the above problems occurs.

She graduated from the Institute of Tourism of the FPU with a degree in Manager, she loves to travel and communicate with people. She is interested in psychology, enjoys dancing, studies English. For five years of maternity leave, she thoroughly mastered housekeeping, not forgetting about her own development. Skillfully uses words, can support a conversation on any topic due to interest in different areas of life.

READ  How To Find Out The Model Of Washing Machine LG

Found a bug? Highlight it and press the buttons:

The expression “soap opera” (“soap”) did not arise by chance. The earliest series and shows with female audiences were televised while housewives were cleaning, ironing and doing laundry. In addition, to attract viewers to the screens, commercials of detergents: soaps and powders were often played on the air.

There are a wide variety of balls that are used in a washing machine. Antistatic ones will prevent fabrics from sticking to the body after washing, balls with special loops “comb” the villi and prevent the appearance of pellets, and silicone ones with pimples will prevent down from falling off when washing outerwear.

Washing machines are related to the origin of the expression “money laundering”. In the 1930s, American gangsters used the laundry network as a cover for their illegal activities. By passing off the proceeds of crime for the proceeds from cleaning clothes, they turned dirty money into clean money.

It is convenient to use a regular plastic bag for washing small items on the road or in a hotel. Knead socks or tights inside a tied bag along with water and a little detergent. This method allows you to pre-soak clothes and perform washing without damaging the fabric and without spending a lot of powder and water.

Washing machines equipped with the “No Iron” or “Easy Iron” functions can wash your laundry without wrinkling it. This effect is achieved due to a special approach to spinning. it is performed at low speeds, with long pauses, and a small amount of water remains in the tank.

The first officially patented washing machine was made of wood and was a box with a frame, half filled with wooden balls. Inside, they loaded laundry for washing, detergent and, using a lever, moved the frame, which, in turn, made the balls move and rub the laundry.

History knows the fact when a kitten got into the drum of a washing machine and, having gone through a full cycle of washing on the “Woolen things” program, got out of the unit safe and sound. The only nuisance for a pet was an allergy to washing powder.

There is a “bachelor” washing machine. The laundry washed in this unit does not need to be ironed at all! The thing is that the device does not have a drum: some things can be placed inside the container directly on hangers (for example, jackets and shirts), and smaller things (for example, underwear and socks). on special shelves.

In the 19th century, washing ladies’ toilets took a lot of time. The dresses were unstitched beforehand, and then washed and dried each part separately so that the fabric would not deform. After washing, the clothes were sewn again.

The washing machine does not spin the laundry: causes and remedies

Sometimes the laundry remains wet after washing. This means that the washing machine did not spin it. In some cases, when the spin is turned on, the drum continues to spin at low rpm.

This situation cannot be ignored. The reason for the malfunction can be quite serious. You can fix some problems yourself. But sometimes professional help is required. After all, illiterate actions can lead to the need for expensive repairs.

The washing machine stops spinning the laundry or does it poorly for several main reasons:

  • incorrect loading of laundry;
  • Hall sensor breakage;
  • engine problems;
  • problems in the drain system;
  • control module malfunction.

Before looking for a breakdown inside the machine, it is worth setting a washing program that involves spinning the laundry. If the delicate mode is set, the appliance will not wring out the clothes.

For Indesit models, this step may not be compatible with the selected program. Then the function selection button will flash and the spin will not be activated. And in machines “Veko” the number of revolutions during spinning depends on the type of fabric and is at least 200 per minute. At such a low speed, you might not notice that the process is going on. Therefore, it is worth carrying out another wash at high speeds.

If the program is selected correctly and the washing machine should spin the laundry, but this does not happen, it is worth looking for possible malfunctions.

Do not use the machine until the cause of the malfunction has been identified. After all, even a minor mistake can lead to serious damage.

Before starting work, disconnect the mechanism from the network and drain the water from it.

The most harmless reason that the machine stopped spinning is incorrect loading of things into the drum.

If you put too many clothes in it, the device will not cope with the load. Then a special sensor will work, which will send an overload signal. As a result, the machine will not start spinning in order to protect the system from strong vibration.

The same situation occurs if you put very little laundry or one large item in the drum. Sometimes, during the washing process, all the clothes get bunched up or fall into a pillowcase. In this case, the sensor will work again, since the laundry should be evenly distributed in the drum.

How to fix this problem. wash as many items at a time as recommended by the manufacturer. See instructions for use for maximum capacity.

If you plan to wash one large item, it is advisable to put several small items with it. It is important to straighten the laundry in the drum before starting the program. Then it will not stray into lumps.

This problem is most often encountered by users of the “ARDO” and “Bosch” models. Owners of the Bosch Classixx 5 built-in machine, if the laundry is loaded incorrectly, are often faced with the fact that during spinning, the unit begins to vibrate strongly and even bounce.

Overloading laundry

Placing too much laundry in the drum can make it difficult to turn. As a result, the motor power is simply not enough to set the required speed and efficient spin.


It is advisable to start repairing the Zanussi washing machine from the simplest unit: the filter. It is necessary to get access to it and thoroughly clean it from excess contamination. If necessary, the filter is changed to a new one.

Then you need to disassemble the machine and disconnect the pipe. All elements are checked for debris and mechanical damage. If no external problems are observed, you should start checking the electronics. The motor and control board are checked with a multimeter. If the values ​​at any nodes differ significantly from the nominal ones, the problem will be in them.

Traditionally, a tachometer and a pressure switch deserve special consideration. The models of this brand are usually equipped with inexpensive components that may well fail. Finding a problem will require immediate replacement of these components.

Problems with the electronic module

All functions of the washing machine are controlled by an electronic module. Its malfunction gives rise to many problems not only with spinning, but also with other modes of operation of the device.

Belt drive breakage

The drum belt drive most often fails on LG devices. Usually the cause of such a breakdown is overloading or improper balancing of things in the drum.

Reasons why the washing machine does not spin

Determining why the washing machine does not wring out the laundry is not so easy without special knowledge. However, a careful study of the specifics of the operation of devices and the features of error indication will help to quickly identify a possible breakdown.

Broken pressure switch

A malfunction of the pressure switch is accompanied by problems with the diagnosis of the system, as well as difficulties with water intake. The water level may be too low or, on the contrary, too high. As a result, the machine will either overheat or the laundry will not wring out completely.

The washing machine does not spin: causes and solutions to the problem

The use of even the most reliable washing machine does not guarantee a complete absence of malfunctions throughout the entire period of operation. One of the most common problems seems to be the situation in which the washing machine stops spinning the laundry. It manifests itself most often by unstable drum rotations or a complete refusal to set the corresponding revolutions. The best solution would be to familiarize yourself in advance with the main causes of such a problem, as well as methods for solving the problem for popular models of washing machines.


The appearance of error F08 usually accompanies a situation in which the spin does not work in the Indesit washing machine. It indicates a problem with the operation of the Tubular Heater switch-on relay or a malfunction of the pressure switch. To repair, you need to check the corresponding contacts on the board. It may be necessary to replace the control board or the pressure switch itself.

Most often, the main reason is the breakdown of the Tubular Heater on the body of the washing machine. This is checked using a multimeter set to the maximum resistance measurement mode. Even small values ​​indicate breakdown.

The Tubular Heater must be completely replaced. The old component is unscrewed, and a new one is attached in its place. It is advisable to purchase a device from a reliable manufacturer, so as not to face unpleasant consequences later.


Failure of the spin mode on Samsung washing machines can be due to a worn drive belt, a faulty tachometer, a failure in the control unit, a breakdown of the pressure switch, or even damage to the electric motor.

The most harmless malfunction is a situation in which a rotating element appears on the shaft of the electric motor. In this case, the problem will be due to the fact that the tachometer attached to this element simply cannot correctly read the revolutions and transmit information to the control unit. As a result, it is impossible to adjust the spin speed in automatic mode, and the timer of the machine stops at 10 minutes. To fix the problem, sometimes it is enough just to pick up a washer, with which you can ensure a reliable connection of all elements on the motor shaft. The machine will stop humming during operation and will begin to wring out things correctly.

The washing machine does not rinse or wring out

Before starting troubleshooting, you need to de-energize the machine. Be sure to remove the plug from the socket, this is very important! Now it is necessary to forcibly free the unit from water. This can be done through the drain filter. It is located at the bottom of the machine, behind a small panel. Now take out the laundry, you will have to rinse and wring it out by hand. Everything is ready, we start troubleshooting.

READ  Inverter Washing Machine What Does It Mean

The washing machine does not go into rinse mode

If you have a washing machine, chances are you have appreciated all its benefits long ago. Modern housewives have long forgotten what it means to wash, rinse and wring out clothes by hand.

Nevertheless, even the best and most high-quality washing machine is still a technique that tends to break. Quite often, a situation arises when the washing machine suddenly stops during the washing process, does not rinse and does not wring out the laundry. Why is this happening and how to fix the trouble? Let’s take a look at the most common reasons.

The washing machine is frozen and does not go into rinse mode

The situation looks something like this: the washing machine starts up in normal mode, washes for a while, but as soon as it comes to rinsing, the program for some reason stops and goes into standby mode. First you need to find out what exactly your assistant does not want to do: rinse, squeeze or pump out water.

First of all, you need to reset the current settings, select the “drain” mode and start the washer again. If nothing happens, examine the integrity of the drain hose. It is likely that it just twisted or was pinched by something heavy. Therefore the washing machine does not spin the laundry. Is the hose ok? Look for a blockage in the sewer pipe. To do this, carefully detach the drain connection and lower it into a bathtub or sink. If the program “drain” has worked, then the matter is in the plumbing.

After all the manipulations done, everything remains the same and the washing machine does not rinse or wring out the laundry? So everything is bad. the problem is in the car.

The washing machine does not rinse the laundry well

If the washing machine does not rinse the laundry or does it badly, there may be several reasons for this, from the simplest and most commonplace to complex and unpleasant. Here are some situations when the reason lies not at all in the breakdown of the unit:

Overload. If you put too much laundry into the machine, then the washing powder has little space and does not dissolve well. It clogs up in the folds of clothing and does not have enough contact with water.

Large amount of powder. Sometimes white stains on the laundry remain due to the fact that the amount of powder is much higher than the volume of water intended for rinsing. To eliminate the trouble, it is enough to run an additional cycle several times.

Low water pressure. Insufficiently strong pressure is for two reasons:

  • malfunctions in the entire plumbing;
  • the hose supplying water to the unit is clogged.

In the first case, you can’t do anything, you just need to wait until the situation improves. In the second, you need to clean the supply pipe and the filter mesh installed at the entrance to the system, the rinsing program will start again.

If none of the above is confirmed, most likely the cause of the trouble lies in the breakdown of the washing machine itself.

See also. How to repair a washing machine control module yourself

Blockage in pump, return filter or pipe

This is the most common answer to the question of why the washing machine does not go into rinsing mode or does not spin the laundry well. There is a lot of debris in the dirty water that the machine empties after washing. Sand, dust, dirt, hair, threads and small pellets and lint. Sometimes the contents of the s are added to all this. Garbage clogs the drain system and the water simply has nowhere to go. In order for rinsing to resume, you need to thoroughly clean the drain and filler filters.

Burnt out Tubular Heater

If the heating element burns out, the water simply does not heat up to the set temperature. This becomes the reason that the process stops at the washing stage, and the rinsing cycle simply does not have time to start. If, when setting the washing mode, you set the temperature to more than 30 ° C, just touch the glass. Is it all cold? This means the Tubular Heater is defective and needs to be replaced.

Burned out control module

In other words, the control board has become unusable in the washing machine. Without this part, the machine stops receiving and receiving commands, which means that the rinsing mode will not turn on.

Broken water level sensor

The washing machine has such a device. a pressure switch. It determines the water level in the tank of the unit. Depending on the data received from this device, the control board commands the washing process. If the water level sensor is broken, the washing machine simply “does not understand” what to do and stops.

The drain pump has become unusable

This is another of the reasons why the rinse mode does not work, or the washing machine does not spin things. The drain pump does not drain water after washing and the washing machine does not rinse the laundry. The cause of the breakdown may be the falling of various objects into the drain pump or simply a long service life.

If all hoses, filters and tubes are cleaned, the drain is working as expected, and still the washing machine does not switch the rinse mode, there are a couple more reasons for this.

Banal mistakes

What happens to the washing machine when the spinning does not work, but the machine performs all other functions (washing, rinsing, draining water). No matter how rude it may sound, the user’s inattention may be to blame. Here are the typical mistakes people make:

  • use the wrong mode, for example, in programs such as “Wool”, Silk “,” Hand wash “, the spin mode may not be provided at all. This will remove damp laundry from the drum. You can solve the problem by turning on the “Spin” separately after the end of the main program;
  • accidentally press the button “No spin”;
  • too many things are put into the drum, overload occurs, the machine does not wring out. In this situation, things need to be taken out of the drum of the washing machine and divided approximately equally into two loads and squeezed out in turn by starting the “Spin” function. If there is a single down jacket that has not been wrung out in the drum, then either it is too big for the drum of your machine, or it is unevenly knocked to one side. Perhaps, special balls for washing will help correct the situation, put them together with the down jacket and start the “Spin”;
  • washing too little laundry, which leads to imbalance, the machine freezes during the spin phase.

When washing laundry, put a few large items in the drum with small items. For example, socks can be washed with jeans or tights.

  • do not clean the water drain filter. It can become clogged and affect the spin process.
  • LG washing machine does not spin. what to do

    The LG washing machine does not wring out the laundry after washing. this is a problem that people often turn to the masters of service centers. Why does one have to get wet laundry out of the drum at one point??

    This issue needs to be dealt with carefully, because the reasons can be very different from violations of operating rules to serious damage. Only after understanding the problem, you can build an action plan to eliminate the malfunction.

    Damage to the tachometer or motor

    Frequent overloads of the washing machine drum can break the sensor responsible for the engine speed. If it breaks, the washing machine stops pressing the laundry. This problem happens very rarely, but still it should not be ruled out. It is possible that the matter is not in the sensor, but in the oxidized wires coming from the sensor, or in a loose mount.

    Even less often, spinning in the washing machine disappears due to a burnt out electric motor. In LG machines, as a rule, an inverter motor is installed, and it is quite reliable, it’s not for nothing that manufacturers give it a 10-year warranty. Replacing an engine in a modern car can cost a pretty penny. Whereas you can replace the tachometer yourself.

    Control module problems

    The functionality of the control module can be checked in diagnostic mode. This mode is not available in all models of washing machines, but if you do, then try running it. First, plug in the machine and wait for the end of the beep. Then press the two buttons “Spin” and “Temp” simultaneously.

    Having started the diagnostics, press the “Start” button once, as a result the hatch door will be locked. Press the “Start” button again, the machine will go into spin mode. If the machine does not make a single revolution, then there is a problem, to be sure of this, do the following:

    • provide access to the washing machine engine by removing the back panel of the case;
    • take a tester or multimeter and turn on the AC voltage measurement mode;
    • remove the chip with wires from the engine;
    • measure the voltage between the terminals of the wires, if the device shows 140-150 volts, then the control module is working properly. In the absence of voltage, the module will have to be “reflashed” or changed.

    Important! Only a specialist can check the functionality of the electronic module more thoroughly, so in such a situation it is better to seek help. After all, not knowing the nuances, you can aggravate the problem.

    As you can see, there can be many reasons why your washing machine does not spin. At the same time, we did not consider those cases when the absence of spinning is associated with the absence of drainage. If you are interested, you will find the details in the article LG washing machine does not drain or squeeze.