How To Remove The Front Panel Of Washing Machine LG

LG washing machine disassembly instructions

Sometimes there are situations when it is necessary to urgently repair household appliances, or at least inspect for breakdowns, but there is no way to call the master. For example, the washing machine stopped working, the funds do not allow you to invite a specialist, and all that remains is to disassemble the equipment with your own hands. Today, using the example of LG washing machines, we will try to understand whether it is really difficult to disassemble a washing machine.

What may be required in order to disassemble the washing machine?

Of course, such a complex matter implies the presence of a whole arsenal of tools, but it is imperative, as they say, blood from the nose, you need to have the following with you:

  • At least two screwdrivers. slotted and Phillips. It is better, of course, if there are several cross, and they will be of different sizes. everything can be expected!
  • Pliers for removing what will later be unnecessary (obsolete parts) or for unscrewing shaken screws (in the worst case)
  • A hammer in case you need brute force (and it will most likely be needed)
  • A set of different keys, especially open-end wrenches

It will not be superfluous to prepare this entire list of tools in advance. In addition, if there are any additional items in the house that may seem suitable for disassembling the washing machine, you can cook them too. it is better to start disassembly fully armed.

Attention! Before starting work, be sure to disconnect the washing machine from electricity and water to exclude the possibility of flooding the apartment or, which is worse for most people, death from electric shock. In addition, a little advice: shoot all actions on or make a photo report of the work in order to subsequently assemble the machine without force majeure.

  • We start by removing the top cover
  • We continue by removing the bottom panel
  • Removing the top control panel
  • We remove the front wall
  • Remove the back wall
  • We remove what interferes and distracts
  • Disconnecting the wires from the tubular heater (Tubular Heater)
  • The engine undergoes a similar process.
  • Removing the tank of the LG washing machine

Remove the back wall

Removing the back wall is perhaps the easiest thing we will have to do when disassembling an LG washing machine. Business something: unscrew the two screws on the very back wall and remove it with a slight movement of your hand.

Even somehow uninteresting and undignified, but without this banal and, if I may say so, boring action, the whole next process will not make sense. We deliberately separated it from everything that we have been doing so far, since the previous processes were rather mechanical, and ingenuity and accuracy came to our aid. Now the actions will become more difficult, and the risk of breaking the car will increase.

We remove what interferes and distracts

Having removed all the covers and panels, we saw the whole ins and outs of the washing machine in the literal and figurative sense of the word. All unnecessary parts now need to be removed, and therefore, overnight, the pressure switch hoses, the hose coming from the place where the tray (powder receptacle), the inlet hose and the drain pipe are removed.

Too much of the word “hose”, isn’t it? In short, we can assume that all large hoses that are striking when looking at the washing machine in its current form can be removed. To remove the hoses, you will need to unscrew the clamps securing them, and then remove the hoses directly. It is advisable not to remove the clamps from the hoses, especially if the latter are of different diameters.

Removing the top control panel

Before proceeding with the very process of dismantling the top control panel, we need to gain access to the screws that secure it. One of them is located under the tray where the powder is poured.

Therefore, first of all, with a slight movement of your hand and pressing a special button (on LG machines of recent years there is always a button that allows you to easily remove the tray), the tray is removed from its usual place.

One or two more screws are on the opposite side, but we already have access to them, since we removed the top cover in the first step, and therefore, without thinking for a second, we start dismantling the top control panel by unscrewing the screws. Having unscrewed all the screws, try to slightly pull the panel towards you: if you succeed, then you can safely remove the panel, because nothing holds it.

Depending on the model of the machine, the control panel can either be hung on a service hook specially prepared by the manufacturer for such cases, or simply gently set aside without breaking the wires: do not forget that we are not breaking the washing machine, but are trying to do something to “cure” her.

We continue by removing the bottom panel

On LG washing machines, it is best to remove the lower one after the top cover. This is done very, very simply: just pick up the panel by hand, open the latches with a flat-head screwdriver, and then remove the panel. There shouldn’t be any difficulties with removing the bottom cover.

We start by removing the top cover

Almost all models of LG washing machines, as well as all other washing machines, require disassembly to begin by removing the top panel. This operation is very simple: in order to remove the cover, you just need to unscrew a few screws (usually two or three) securing the cover to the back panel, and then push the cover away from you.

If this succeeds, everything is fine: the operation can be continued by simply lifting and removing the panel to the side. In short, the principle of action is as follows: unscrew the screws. push the cover. lift and remove. Do not think that the whole process of disassembling the washing machine is equally simple: this is just the beginning.

Disconnecting the wires from the tubular heater (Tubular Heater)

It’s time to meet the electronics and start turning off the Tubular Heater, an item that is almost the most important part of the entire washing machine as a whole. There will be no electric heater. the water will be icy. well, or rather, the temperature set by the managing organization.

To avoid confusion, take a picture as clearly as possible of how the Tubular Heater was connected before dismantling. At the beginning of the article, we already recommended making a photo report of the entire process, but special attention should be paid to disconnecting the wires from the Tubular Heater.

Any mistake can cost a fatal breakdown of the tubular electric heater, and replacing it will cost a pretty penny. although, of course, if the LG washing machine is disassembled precisely because of a faulty Tubular Heater, you don’t need to think too much, but still take precautions.

The engine undergoes a similar process.

The wires of the washing machine electric motor also need to be disconnected, and we strongly recommend taking pictures of them too: the photo will take only 1-3 MB, but it will give you confidence and the opportunity not to make mistakes during the subsequent assembly of the machine.

According to some unifying feature, the wires can be fastened with a plastic tie, and therefore all such “sets of wires” should be carefully removed from the machine so that they do not interfere and are not exposed to any influence, in case the situation gets out of your control.

We remove the front wall

The time has come to remove the front wall, which has long been looking at us with its sad glass gaze and asked not to remove it. Let’s not heed the pleas of modest components: necessity is a necessity.

How To Remove The Front Panel Of Washing Machine LG

But in order to dismantle the front wall, you must first disconnect the cuff (the rubber band located immediately behind the door) so that it stops blocking the panel. Removing the cuff is not a difficult process: just feel the spring holding the cuff and press on it, as the cuff will immediately loosen up and you can put it back into the tank so it won’t get lost.

READ  Cuff Replacement For Washing Machine LG

Now, by the way, you can start the process of removing the front wall.
To begin with, unscrew the screws that connect the front panel to the top, and, accordingly, they are at the top. The number of screws is usually 3-4 pieces, no more.

Having unscrewed them, the front panel can be lifted: it is held on hooks, in other words, it hangs. Most likely, it will fail the first time. The tank lock will interfere, which prevents the door from opening at the most inopportune moment during operation. It needs to be disconnected. On many LG washing machines, this is done by simply removing the lock with a screwdriver from the groove before removing the front panel.

How to disassemble a LG washing machine for repair. detailed instructions

When the warranty periods are far behind, and something is broken in the washing machine, many home craftsmen undertake repairs on their own. To determine the cause of the breakdown, you first need to “look” under the unit body.

Each model has design features, but the basic principle of parsing is the same for all machines. Consider how to disassemble a LG washing machine (as well as Indesit, Bosh, Samsung or any other).

Washing machine device diagram

The next thing to do is to study the machine. Each unit is accompanied by an instruction with a picture and captions for all units. It will be much easier to navigate if you know where what is, and what is the correct name.

General diagram of the device of front-type washing machines

Preparatory stage

  • curly and slotted screwdrivers;
  • pliers simple and bent;
  • round-nose pliers;
  • nippers;
  • hammer;
  • ticks;
  • set of open-end wrenches;
  • socket wrenches (heads).

If you are repairing a typewriter for the first time, also stock up on a camera.

By filming each stage of the parsing, it will be easier for you to assemble. according to photographs. You will be able to reproduce the reverse sequence of actions faster and without errors.

For some reason (lack of finances or mistrust of specialists), owners of washing machines prefer not to contact the service center in the event of a unit breakdown. Do-it-yourself Ariston washing machine repair can be done even by a beginner, if we are not talking about a serious breakdown.

The next topic will be of interest to owners of Beko washing machines. Here’s everything about troubleshooting basic unit faults.

A washing machine is a complex equipment, therefore, among other types of equipment, it is washing machines that deliver the most trouble to their owners. At this link http://aquacomm.ru/cancliz/mnogokvartirnyie-doma/santehnika/stiralnaya-mashina-ARDO-remont-svoimi-rukami.html we will consider the features of repairing devices under the ARDO brand.

Analysis of the washing machine. Step instructions

Now the unit is disconnected from all communications (drain, water supply and power supply) and you can start disassembling:

  • The top panel is removed. On the back panel, at the top of it, there are two screws that fix the cover. After unscrewing them, slightly pressing on the cover, you can easily remove it.
  • The bottom panel. Behind it is a drain filter and an emergency drain hose. Therefore, easy removal of this panel is provided by the manufacturer. The panel is held by three latches. By pressing the panel on the sides and top, it can be removed manually (or pry off with a screwdriver). One screw can be added in newer models.
  • The hopper for the distribution of detergents is removed (there is a plastic button inside, when you press it, the tray easily comes out, you just need to pull it towards you).
  • Top control panel. The first of the screws securing the panel is located under the powder hopper. The second screw is usually located at the opposite end of the panel, at the top. The fasteners are removed, the panel is pulled towards itself and removed. The electronic control module is located on the back of the panel. For convenience, it can be thrown onto the top of the machine.
  • Rubber clamp. Sometimes it may be necessary to free the front wall from the rubber O-ring. On the cuff, you need to find the place where the clamp connects. Typically, this is a small spring that needs to be tucked in. Now you can pull and pull the clamp in a circle. The cuff is tucked inward. To remove the clamp, round-nose pliers, pliers, or a screwdriver can be useful (depending on which clamp model).
  • Front panel. At the bottom of the facepiece (where the bottom panel was), four screws are unscrewed. 2 screws are located in the area of ​​the hatch lock. Under the upper control panel there are 3 more fasteners, by unscrewing which you can remove the front part of the machine. It is usually held on hooks, and to remove the panel, you need to lift it up a little. To completely separate the part, you need to remove the electrical connector from the locking device of the hatch.
  • Back wall. Fixing the back of the case is a few more screws, by unscrewing which, you can access the back of the device.

Dismantling the LG washing machine

This is how the main parts of the frame are removed, which opens access to the internal parts. We can say that this is a preparatory operation, and further actions will depend on the inspection performed and the detected malfunction.

When the top panel is removed, a lot of wires prevent it from completely removing. Some models have service hooks where you can attach the unit during repair.
Or you can disconnect all the wires, just first mark them with a marker so as not to confuse.

Disassembly of individual elements and assemblies

  • Above, closer to the rear wall, there is a liquid level sensor in the tank, or a pressure switch. Disconnects his hose.
  • There is another hose from the detergent hopper, it is also disconnected.
  • Now the drain and filler pipes.

The wires are disconnected from the engine (in advance you need to take care of how not to confuse them when it comes time to collect everything back).

It is also imperative to twist the counterweights (it is almost impossible to remove the tank with them). Weights can be at the front or at the back of the body. These are concrete elements, sometimes colored. They are usually secured with long bolts.

Tubular Heater. Under the tank (front or back) there is a Tubular Heater. It is not visible to the naked eye. its end part with terminals is accessible. Removing the wires from it, they must first be signed, and even better. photographed. In some cases, it is possible to remove the entire Tubular Heater (along with the wires), then you need to unscrew the central nut, and then “drown” the stud, on which the nut is screwed, inside. Now, with a screwdriver, you need to pick up the rubber seal on which the Tubular Heater is set from different sides and gradually remove the heater.

When you need to change the Tubular Heater, you need to determine whether it is in the front or back (it depends on which element of the body to remove). Even if the instructions have not been preserved, it is advised to start the “search” from the rear panel. It is much easier to remove and even if the Tubular Heater is not there, it’s not scary. screwing 4 screws back is not a problem.

Using a socket wrench, the shock absorbers (legs on the left and right) that support the tank are unscrewed.

After the tank is freed from all parts and assemblies, it can be carefully removed from the springs.

LG washing machine tank

Disconnecting the engine. When the engine is already disconnected from all the wires and removed together with the tank (which is not necessary. the engine can be removed without touching the tank), the drive belt is removed (passes from the engine to the pulley located on the tank) and then the engine itself and the shock absorbers are twisted.

Dismantling the tank. To disassemble the tank itself, first unscrew the screw that secures the pulley, it is removed. The shaft must be pressed into the tank. The clamp is removed and one part of the tank is pulled out of the other.

Bearings. When the tank is “halved”, the oil seals are pulled out of it, and the bearings are knocked out. The place where the bearings were is cleaned. The oil seals are lubricated with special grease, and so that new parts sit better, you can warm up the installation site with a hairdryer.

Pump. It is located in the front lower part of the unit. It is fastened with three screws for a figured screwdriver and three clamps. There is also an electrical connector at the bottom. The clamps are disconnected using pliers (they need to press the clamps and disconnect the hoses). To disconnect the connector, press on it with a screwdriver. There is dirt around the pump, it is better to wipe it right away.

When the pump needs to be removed, it can be done through the bottom of the housing. To dismantle it, put the machine on its side.

READ  How To Remove The Bearing On A Washing Machine LG

And further. Place something under the unit and prepare a container where you can drain the water remaining in the pump.

So. If you have the skills to repair household appliances, it is quite possible to save money on servicing the washing machine. Self-replacement, for example, bearings, will cost about half less than repair in a workshop.

Reasonable price, pleasant design and reliability are the main advantages of Hansa washing machines. But small breakdowns of washing machines, unfortunately, are not uncommon for this brand. Hans washing machine: DIY repair of the most common breakdowns, read carefully.

You will find useful information about repairing Samsung washing machines in this topic. Why won’t the washing machine turn on, makes a lot of noise or doesn’t heat up the water? You will learn about all this in the article.

Front Panel

How to remove the front cover of your LG washing machine:

  • Open the hatch door.
  • Fold back the edge of the hatch cuff at the base.
  • You will see a metal clamp. It can be removed by prying slightly with a flat screwdriver. The manufacturer has provided a simple and convenient spring clamp, so it will not be difficult to remove it.
  • Tuck the edges of the sealing rubber (cuff) inside the drum.
  • Open the filter hatch.
  • Unscrew the fixing bolts that are located near the filter.
  • Release the latches on the bottom panel, set aside.
  • Return to the hatch. Remove the two bolts holding the door lock.
  • Place your hand behind the body and pull out the lock. Disconnect all wires from it and remove.
  • Unscrew all the screws at the top and bottom that hold the front panel.
  • Remove and set aside.

Top cover

Using a Phillips screwdriver, go to the back panel and unscrew the two screws on top that hold the top panel. Stack the bolts together to avoid getting lost. Now, slide the cover forward a little, remove it from the case and set it aside.

Control Panel

To remove the panel, pull out the detergent dispenser drawer. Pull it towards you while pressing the latch in the center. There are three screws just behind the tray. Unscrew them, as well as one screw on the opposite side with a Phillips screwdriver.

Using a slotted screwdriver, release the plastic clips holding the control panel. If you do not want to completely remove the panel, place it on top. To remove completely. unfasten the wires by opening the connectors.

Back cover

In modern models of LG washing machines, there is a service hatch at the back. It is closed by a metal cover that is held in place by bolts. Unscrew the bolts around the hatch, remove and set aside. You now have access to the inner parts of the Washing machine.

Counterweights

Counterweights add weight to the tank, preventing it from hitting the walls during vibration. Removing the panel reveals two counterweights around the Washing machine hatch.

To remove them, unscrew the bolts using a torx head. You are well on your way to fully disassembling your LG automatic machine. Also remove the top counterweight.

Preparatory work

Please note that LG washer models are equipped with an inverter motor. Therefore, the procedure for its removal will differ from other machines. with a collector motor.

To effectively dismantle the washing machine, select the following tools:

  • Screwdrivers. Three types are required: flat, cross, hex.
  • Pliers.
  • Hammer.
  • Socket wrenches.
  • Open-end wrenches from 8 mm to 17 mm.

Make sure you have all the tools close at hand. Also, provide additional space so that during disassembly there is where to turn around and where to put parts.

Before you disassemble the LG washing machine, you need to prepare it for repair.

Unplug the Washing machine first. Prepare a container for collecting water in advance. Unscrew the inlet hose from the body, drain the remaining water from it. Do the same with the other end of the hose.

Unscrew the drain filter located at the bottom of the front panel, behind the hatch. Place a container underneath and drain the water. Empty the laundry tub if necessary.

Now move the machine away from the wall to freely approach the back of the machine.

Time to learn how to disassemble a LG washing machine (LG).

Basic details

Now you need to disconnect all the parts that are located on top of the tank.

To remove the hopper of the metering tray, unscrew the screws from the top, disconnect the branch pipe coming from the bottom. Disconnect the inlet valve contacts. To remove the valve, unscrew the two screws at the back. Pull out the hopper together with the valve.

We disassemble the LG washing machine further: disconnect the pressure switch hose leading to the tank. Inspect the tank, check connections, parts that may prevent it from being removed. If you’ve disconnected everything, move down the case.

Step by step execution

Before starting work, familiarize yourself with the diagram and procedure for disassembling the LG washing machine.

The only difference between LG machines is the presence of a direct drive, which must be taken into account when dismantling.

Do-it-yourself LG washing machine disassembly starts with removing the panels.

Removing the engine

First you need to disconnect the drain pipe. Use a pair of pliers to loosen the metal clamp of the pipe and disconnect it. Sometimes these clamps are secured with a bolt that needs to be removed.

Unfasten all wires leading to the motor. It happens that bundles of wires held together by clamps lead to the engine. They need to be put aside.

Unplug the connectors of the wires leading to the heating element. The Tubular Heater itself is optional. Before disassembling your LG washing machine, remove the engine:

  • Remove the motor cover by unscrewing the center screw.
  • You will see six more mounts located on the engine.
  • Unscrew all bolts.

After you have removed the motor, the rear tank no longer holds anything except the struts.

Removing the narrow panel

It is necessary to unscrew the lower front strip, since it hides the fastening of the large front panel. There is also a hatch that gives access to the pump and filter. Removing it, you will see the screws that you have to unscrew.

After removing the bolts, pry the cover slightly underneath with a flat screwdriver. The fasteners will slide out of the grooves and the plate can be removed and then set aside.

Let’s get ready to disassemble the car

First of all, make sure that the equipment is disconnected from the power supply, the plug is removed from the socket. Also shut off the water and disconnect the water injection and discharge hoses. Pull the washing machine to where it will be convenient to carry out repairs, and proceed with the necessary manipulations.

In the process of disassembling a technical device, you need a minimum set of tools. Prepare pliers, Phillips head, and star screwdriver. The latter will come in handy when working with selected LG models, where special fixing bolts are used. The dismantling process is carried out in stages, you need:

  • unscrew the top cover;
  • remove the lower decorative part of the sheathing;
  • remove the control panel;
  • separate the hatch locking device;
  • put aside the front panel itself.

It is important to adhere to the order of the steps so as not to damage the case and not to increase the number of device breakdowns. Before performing the first steps, make sure that safety standards are observed, then follow the recommendations of this manual.

How to remove the front panel on an LG washing machine

Washing machine not working? Household appliances can be repaired by hand. Most of the breakdowns can be fixed by any man with his head on his shoulders, and “hands from the right place.” The main thing is to correctly identify the problem, and for this you need to look inside the broken device. Learn how to properly remove the front panel of your LG horizontal load washing machine without damaging your electronics.

Removing the control panel

The hardest part will be removing the control panel. This process requires maximum precision and care, since damage to this part can lead to irreparable damage to the electronic system. Take steps.

  • Unscrew the screws.
  • Use a flat screwdriver to pry the plastic clips on the top edges, pull slightly upward and release them.
  • Slide the panel towards you to release the lower fasteners, then lift it up and remove.

When the fasteners come out of the grooves, you will hear clicks, light when working with the lower latches, and louder at the top. Also, do not forget to monitor the integrity of the wiring so as not to damage it.

Removing the top cover

The top of the case performs a protective function, covering the inside of the machine from moisture and dust, as well as from mechanical damage. The cover is fixed to the rear wall with two cross-thread bolts on the caps. Unscrew them with a screwdriver and set them aside. Be careful not to lose small parts, so that you do not have to separately look for suitable substitutes.

READ  Washing Machine Does Not Drain Water What To Do

To perform the next step, you need to go to the back of the product, grasp the cover with your hands, and pull it towards you in a horizontal plane. Do not try to lift the part up before moving the plate a few centimeters. Its vertical movement is impossible due to the design features of the mount.

We remove the UBL and the front wall

Before the final stage of work, it is necessary to remove the hatch locking device so that it does not interfere with dismantling the wall. To do this, you need to perform alternate steps.

  • Loosen the clamp that holds the front wall using pliers, screwdriver or round nose pliers.
  • Remove the cuff to open access to the insides of the machine and the lock.
  • Tighten the two screws located near the connection of the lock hook with the UBL.
  • Get the part through the hole.
  • Disconnect the wires, remove the lock.

At the last stage, the front panel itself is removed. To do this, unscrew the screws holding it, located on the front upper edge of the case, and under the lower decorative strip. Now you can remove the wall and start directly repairing the washing machine.

A few tips

When disconnecting the power supply to the control panel or engine of older Bosch, LG, Samsung or Indesit models, do not pull on the wires. Place your fingers on the connector housing. If it doesn’t give in, you can lightly shake it in different directions. Pulling on the wire or applying force may cause the vein to come off the crimp.

To remove the front top and bottom covers, you will need flat head, Phillips or star screwdrivers. It is better to cook all that are available at once, and not be distracted.

Depending on the year of manufacture, the manufacturer and the model, the panels on the washing machines dock with the frame using additional plastic clips. In order not to damage them when separating surfaces, it is necessary to gently press on the teeth not with a screwdriver, but with a tool handle, finger or nail, since the metal can damage the surface of the part. For the same purpose, one cannot act by force: if the component does not give in, it means that not all fasteners have been disconnected yet.

How to withdraw

Disassembly rules are as follows:

  • Before removing the top bezel from a washing machine such as an Indesit front-loading washing machine, remove the top cover and pull out the powder tray.
  • To completely remove it from the grooves, press on the “tongue” of the central latch between the grooves for detergents (or simply move it down) and pull towards you.
  • Next, unscrew and remove the screws hidden under the top cover on the right and left.
  • Remove the fasteners holding the container cavity and the front wall with buttons and indicators: slightly raise this plane and pull out towards you.

Washing machine without top panel When removing the control unit from the body of the Bosch appliance, follow the same sequence. On the Bosch model of the Classic 5 series, the cover is additionally fixed on its right side with a self-tapping screw for an asterisk.

There are many wires leading to the control module, which should be disconnected only after fixing their accessories on a paper diagram or taking a photo of them using a phone.

Star screwdriver Remove the front panel of the LG direct drive washing machine or its belt-driven predecessor to gain access to the drum attachment points. This need also arises on washing machines such as Samsung, Indesit, Atlant and Bosch when bearings or an oil seal need to be replaced.

Dismantling the LG washing machine To dismantle the lower part of the outer panel, in which the loading door is located, on Indesit units you need to:

  • Remove the upper front panel.
  • Remove the outer part of the sealing collar by first pulling out the wire retaining ring inserted into the recess around the hatch.
  • After unscrewing two screws, remove the door lock from the case.
  • Remove the three screws under the powder container and the two at the bottom of the front wall.
  • Lifting and prying along the edge, remove the wall from the grooves and pull it out (towards you) along with the door.

Removing the control panel of the Indesit washing machine The recess of the front of the Samsung washing machine differs from this sequence only in point 4. Instead of three screws under the container, you should unscrew one. To separate the outer wall of the Bosch washing machine from the body, you should do the same, but you must tilt the entire unit back to access the fasteners, which are screwed vertically from below.

Self-tapping screws that fix the bottom of the front wall on LG typewriters are hidden under the flap of the drain plug.

Lower part of the front panel

Please note that there is a metal cover at the bottom of the front panel, on the right side of which there is a hatch, which provides access to the filter and pump of the device. There are front panel fasteners under this cover, so you will have to remove it.

Under the hatch you will find several screws that need to be removed, after which the cover can be removed with a little effort and possibly the help of a flat screwdriver. Pry the lower part with a screwdriver, this will release it from the fasteners, then you can easily remove it.

Sensor

The door of the machine is equipped with a lock sensor, which prevents it from opening during washing. The sensor is connected to the door lock using special terminals, they can be disconnected by unscrewing the lock completely, or in the process of removing the front panel itself.

Let’s get ready to disassemble the car

First of all, make sure that the equipment is disconnected from the power supply, the plug is removed from the socket. Also shut off the water and disconnect the water injection and discharge hoses. Pull the washing machine to where it will be convenient to carry out repairs, and proceed with the necessary manipulations.

In the process of disassembling a technical device, you need a minimum set of tools. Prepare pliers, a Phillips head, and a star screwdriver. The latter will come in handy when working with selected LG models, where special fastening bolts are used. The dismantling process is carried out in stages, you need:

  • unscrew the top cover;
  • remove the lower decorative part of the sheathing;
  • remove the control panel;
  • separate the hatch locking device;
  • put aside the front panel itself.

It is important to adhere to the order of the steps so as not to damage the case and not to increase the number of device breakdowns. Before performing the first steps, make sure that safety standards are observed, then follow the recommendations of this manual.

Control Panel

The electronic control panel of the LG washing machine is one of the most important parts of it, so you need to be as careful as possible when removing this part. You will need a Phillips and flathead screwdrivers. The first step is to unscrew the screws, which became accessible after you removed the top cover. Now you can start opening the plastic latches, this process will require accuracy and patience.

Using a flat screwdriver, gently pry the plastic case of the control panel in the place where the latch holds it, do this along the entire length. Once you are done with the top clips, pull the panel up and place it on the typewriter without damaging the cables and cables.

Electronic panel

The most important process is to properly remove the control panel, manipulations with a Phillips screwdriver will not work here. After removing the bolts under the powder section, you will have to look at where the plastic latches are located, the top ones will have to be opened with a flat screwdriver, it is clearly shown how this can be done so as not to damage anything. The lower latches can be released by simply pulling the panel up. In fact, this is the end of the process of disassembling the case, now it is necessary to separate all power and other cables.

How to remove the front panel on an LG washing machine

To remove the front cover, behind which the control module of the washing machine is located, a number of preliminary steps must be taken. It is necessary to disconnect the device from the power supply and make sure that all water is drained from the drum and sump. After dismantling the upper part, it becomes possible to remove the surface carrying the door and covering the drum attachment points. The operation can be performed within 15-30 minutes, using only a suitable screwdriver.

Stages

  • Washing machine top cover;
  • Lower part of the front panel;
  • Control Panel;
  • Electronic sensor of the car hatch;
  • The front panel itself;

Now let’s take a closer look at each stage.