How To Open Locked Door Of Washing Machine Samsung

Unlocking your LG washing machine

How To Open Locked Door Of Washing Machine Samsung

What if the washing machine won’t open? In most cases, you can remove the blockage from the equipment of this brand using standard measures that are also suitable for other washing machines. The original version only has a child lock.

To install it, you must simultaneously press two buttons: super rinse and prewash. The command is canceled by the same action, after which the wash can be continued by pressing the start / pause button.

When operating household washing machines, sometimes a situation occurs when the washing was successful, and it is not possible to remove the laundry. Attempts to open the hatch by pressing the corresponding lever of the handle lead to nothing. It is clear that additional physical efforts will not give a positive result, but will only aggravate the problem. What if your washing machine won’t open? You will get the answer to this question by reading this article.

Opening delay

First of all, you need to slow down the ARDOr. It is likely that the machine did not break down, and someone is in a hurry to continue washing as soon as possible and forgot about the automatic closing of the hatch. This measure is a standard safety requirement, which is programmed for all manufactured front-loading washing machines. Samsung is no exception. It should take about 1-2 minutes for the drum to stop completely, the water drained and the system gave the go-ahead to open the door.

If the specified time has passed and the machine is still unavailable, proceed differently. Disconnect the washing machine from the mains and let it “rest” for half an hour. The machine could respond by blocking to sudden voltage drops, a hitch in the water supply or a slight blackout in the apartment. In thirty minutes, the system will reset the settings and open the door lock.

Important! The described methods are suitable only for unlocking the machine with an empty tank, otherwise you must act in a different way.

Blocking reasons

The door lock is part of the normal operation of the washing machine. It is necessary during work so that children or forgetful adults do not accidentally open the door. Thus, manufacturers take care of our safety. At the end of the wash, after one or two minutes, the lock is activated and the door can be opened. And for what reasons the washing machine is blocked if the wash is finished and it is impossible to open the hatch?

  • Electronics malfunctioning. May occur due to interruptions in the supply of electricity or water, as well as voltage surges in the network.
  • Locking mechanism breakage. In this case, it will need to be replaced.
  • Drain filter clogged. The water does not drain completely, so the sensor does not allow the hatch to be unlocked.
  • The Child Lock function is accidentally activated.

As you can see, there are few reasons. And in most cases the problem is solved in a simple way. What to do, we will tell you below.

What is the door lock function for?

The designers and manufacturers of washing machines have taken care of the safety of users by equipping their products with a number of useful functions. One of them is door lock blocking. It works at the moment the machine starts to work and turns off when all the operations provided by the program are completed.

Without blocking, you could forgetfully open the hatch at full speed with a high probability of getting burned with hot water and flooding the floor of your apartment. The bollard consists of a mechanical and an electrical part. Like any other technical device, it can fail over time.

Advice! Do not panic if the door does not open immediately after stopping the machine. It may be necessary to wait a couple more minutes for the control unit to give the command to open the lock.

Why the hatch door does not open: reasons for blocking

Blocking the hatch lock can be caused by various reasons. They are not necessarily related to the breakdown of your washing machine. It is recommended that you check all possible options one by one before taking decisive action.

Unlocking your Bosch washing machine

The Bosch brand is well respected for the quality and reliability of these appliances. This brand has its own secrets for unlocking in various situations. If your model has plus and minus keys on the panel, then clicking on the minus can unlock the machine without wasting time and effort.

If the key is constantly on and does not allow any mode to be turned on, you must return to the program during which the failure occurred, then press the delayed start button and hold your finger on it for 5 seconds. After that, the blocking will be disabled.

How to unlock the washing machine

How to open the washing machine while washing? Such a need arises if, for example, you forgot to put a thing in the drum that urgently needs to be washed, or forgot to take out keys or coins from your and they now rattle inside the drum of the machine.

Try to stop the unit and wait a few minutes. If the door of the clipper does not open, unplug the clipper. In this case, most models will drain themselves, after which the hatch will open. If this does not work, plug the machine back in and set the drain program. the water should start draining immediately after selecting this mode.

If the reason for the unlocking failure is a clogged filter, water may remain in the drum and a special sensor will not allow opening the door. The problem is solved by cleaning the filter. It is usually located at the very bottom of the washing machine and is covered with a special plug.

Is the filter clean? Screw the cap back and try setting the rinse and spin modes. If that still doesn’t work, unplug the power cord and plug it back on after 15 minutes. Zero result again? You will have to remove the plastic cover from the top and try to open the locking device from the inside.

READ  How To Check Tena On A Washing Machine With A Multimeter

How to open a washing machine. if it is locked by accidentally activating the child lock? It is enough to hold down the start button for 5 seconds and the machine will unlock.

Why is it difficult to open?

If the door of the machine after washing does not open for the first and second time, do not try again, increasing the pressure and applied force. This approach will only aggravate the situation and add a broken lock or a torn door to the blocking. It is more productive to understand the reasons for the current situation, of which there may be only five.

  • Standard auto-lock while the machine is running. After the completion of the next cycle, at least 1-2 minutes should pass for Samsung machines, after which the door will open independently.
  • System crash. Possible technical violation in the washing program. Failure is provoked by sudden power surges, violations in the water supply, abrupt power outages.
  • Defective lock block. It is possible that the lock is jammed. Normal wear and tear, careless loading / unloading of the tank or rough opening of the door. all this negatively affects the locking mechanism.
  • The drain hose is blocked. In this case, the water is not drained from the tank, therefore the system does not give a signal to unlock. Even if the cycle was completed.
  • Child lock. Special protection mode can be enabled accidentally.

Look for the reason for the locked hatch is among the listed items. The most ideal option is to open the technical data sheet or instructions for the existing Samsung model and see the procedure for each case. If such papers are not found in the house, we figure out what to do next, on our own.

Opening the horizontal loading washing machine

In general, the sequence of actions will be as follows:

  • Remove the plug from the socket.
  • If there is water in the tank, substitute the drain pan and loosen the drain plug. Sometimes part of the liquid can be drained through the pumping hose, lowering it as low as possible.
  • Find the end of the emergency opening of the loading door next to the drain filter. It is usually colored yellow or orange. Pulling on it will release the latch mechanism.
  • If an emergency cable is not provided, you will have to manually open the lock. To do this, remove the top cover of the automatic machine and tilt the body back. In this case, the tank will move slightly away from the hatch. You can stick your hand into the resulting gap to open the latch from the inside.

How to open the door of a Samsung washing machine

Receive one most read article by mail once a day. Join us on and .

As long as the washing machine is in wash mode, its door will be locked. This option is deliberately provided by manufacturers of washing equipment and is necessary in order to avoid unpleasant unpleasant accidents with spilling a large amount of water on the floor and the subsequent failure of the entire drum of the washing machine. The sunroof unlocks automatically when the selected wash program ends. Of course, there are situations when the wash is completed, and the hatch for one reason or another remains blocked.

It is important to understand that when the machine finishes a wash program, it does not end it. First, the device enters the diagnostic mode, which takes 3-5 minutes. Only after its completion, the “machine” gives a corresponding sound signal, and with it a command to open the door. The door may not open automatically due to a power outage, water rushing out of the drum, breakdown of the locking device, and breakage of the handle. It is best to call the master in such a situation, but you can do something yourself.

Emergency opening

Most modern washing machines have a special cable for emergency opening of the hatch (yes, the creators have foreseen this possibility as well). As a rule, it is located somewhere in the area of ​​the bottom panel and is painted in a bright color. All you need to do is reach the cable and pull on it.

Important: if there is water left in the drum, you should put some container under the hatch in advance!

There is a washing machine in every house. It’s hard to even imagine how our mothers and grandmothers did without her. Typically, the machine works properly, washing clothes according to a given program. At the end of the process, all that remains is to open the door and remove the clean items from the drum. But sometimes there are malfunctions, and the machine blocks the hatch. We’ll have to figure out the reason for the breakdown, but first you need to somehow open the washing machine if it is blocked.

What to do if the control board is broken?

In the event that at the end of the wash from the control board there is no signal to the door interlock device, the control board breaks down. Perhaps the malfunction happened due to moisture on the board or contacts, or due to a voltage surge in the electrical network. In this case, an accurate diagnosis of the breakdown and checking the board will be required.

Important! In many cases, there is no need to buy a new control module as the old one can be repaired.

It is quite difficult to carry out such repairs, so we would not advise you to do them. After all, you can aggravate the situation, and then expensive repairs are inevitable.

Thus, the key or lock indicators on the washing machine play an important role. They can not only inform about the progress of the program, but also about a serious breakdown of one of the machine parts. We hope you now know what to do when this indicator is on.

When is it necessary to call the master

Knowing how to open an automatic machine that has stopped, if it is locked, you will be able to extract the loaded things from it, but you will not always be able to restore its working capacity. For all problems with the control unit and in cases of breakage of critical parts, contact a repair shop. To do this, you had to follow the simplest preventive measures as rarely as possible:

  • open and close the hatch carefully, effortlessly;
  • do not exceed the drum loading rate;
  • when the first signs of a malfunction appear, take measures to prevent serious damage.
READ  Cleaning Washing Machine Samsung Eco Bubble

Everyone is so accustomed to regularly using the washing machine that a suddenly locked door becomes a big tragedy and is fraught with disrupted plans. Panic is stronger if the tank is full of water and an open door threatens a real flood. But you shouldn’t be in vain to lament and lose heart: in nine cases out of ten, the problem is solved by elementary actions.

over, you don’t need to call a repairman to unlock your Samsung washing machine. Maybe it’s all about the built-in security mechanism, a “glitch” in the system, or a small blockage that can be easily removed without assistance. It is not difficult to diagnose the cause on your own, and the instructions below will help with this.

We change the door hinges and the hatch locking device

Before changing the locking device, you need to check if the door lock, or rather the tongue, on the door itself is not broken. You also need to check the serviceability of the door hinges, it happens that small children hang on the door, which leads to its curvature. Then the door either does not close at all, or closes, but then it jams and does not open. In this case, the hinges must be replaced. Let’s see how to do this using the LG washing machine as an example.

  • Disconnect the machine from water, sewage and electricity.
  • Using special pliers or pliers, you need to remove the metal clamp on the cuff of the washing machine and remove the cuff inside the drum.
  • Disconnect the wire from the door lock.
  • At the bottom of the washer, open the filter door and unscrew the screw holding the plastic housing of the filter door.
  • Now you need to unscrew the screw holding the front of the machine body.
  • Next, you need to remove the top cover of the machine by unscrewing 2 screws at the back.
  • Remove the powder receptacle from the machine.
  • Remove the screws behind the powder tray and the screws behind the control panel.
  • Remove the control panel from the latches, doing it from left to right.
  • Tighten the screws holding the front of the case.
  • Remove the front of the case and place the front on a soft cloth.
  • Unscrew the plastic cover that covers the door hinges, and then unscrew the hinges from the car door.
  • Unscrew the hinges from the body of the washing machine and remove them.
  • Take new hinges and install them in place of the faulty ones, assembling the machine in the reverse order.

As for the sunroof locking device, its replacement is also not difficult if you bought an original spare part for your washing machine. The whole process is presented in detail below.

If the door is locked and closed, you will have to remove the top cover of the washing machine to replace the locking device. Next, you need to feel the lock with your hand and move the latch so that the lock opens. When the drum hatch is open, you can proceed to replace the locking device.

Unlocking your Bosch washing machine

The Bosch brand is well respected for the quality and reliability of these appliances. This brand has its own secrets for unlocking in various situations. If your model has plus and minus keys on the panel, then clicking on the minus can unlock the machine without wasting time and effort.

If the key is constantly on and does not allow any mode to be turned on, you must return to the program during which the failure occurred, then press the delayed start button and hold your finger on it for 5 seconds. After that, the blocking will be disabled.

WW70J52E04WD

The lock is activated / deactivated by the buttons “Temperature” and “Rinse”.

Blocking reasons

The door lock is part of the normal operation of the washing machine. It is necessary during work so that children or forgetful adults do not accidentally open the door. Thus, manufacturers take care of our safety. At the end of the wash, after one or two minutes, the lock is activated and the door can be opened. And for what reasons the washing machine is blocked if the wash is finished and it is impossible to open the hatch?

  • Electronics malfunctioning. May occur due to interruptions in the supply of electricity or water, as well as voltage surges in the network.
  • Locking mechanism breakage. In this case, it will need to be replaced.
  • Drain filter clogged. The water does not drain completely, so the sensor does not allow the hatch to be unlocked.
  • The Child Lock function is accidentally activated.

As you can see, there are few reasons. And in most cases the problem is solved in a simple way. What to do, we will tell you below.

The machine has stopped, there is water inside

When the cycle is over, the door is locked, and there is still water in the drum, which means that there is a malfunction in the drain system. First of all, we wait a few minutes to eliminate the opening delay after automatic blocking. If the door is also motionless, then we try to “provoke” the car:

  • We turn on the standard mode “Spin” or “Rinse”.
  • Waiting for the end of the cycle.
  • If the situation repeats, inspect the drain hose and, if necessary, clean it from clogging.
  • Start spinning again.

Each Samsung model also provides an emergency opening of the washing machine. This is possible with the help of a special rope, which is painted in an intense red or orange color. Most often it is located near the filter, behind a rectangular panel in the lower right corner of the unit. It is enough to slowly pull it towards you to release the lock on the door.

Important! Be prepared for water to pour out of the open door.

For those who could not find the emergency unlocking cable, we suggest using another method:

  • disconnect the washing machine from the electrical network;
  • we provide free access to the unit;
  • remove the top cover of the machine;
  • we tilt the machine until the tank “moves away” from the door;
  • we examine the opened locking mechanism;
  • we find the tongue that locks the door;
  • remove constipation.
READ  The Belt Comes Off The Drum Washing Machine Reasons

All the described manipulations can be performed independently, but it will be faster and easier if you act with outside help. If the door is still locked, it is best to look up the factory instructions and find additional emergency measures. A specific model of Samsung washing machine may have its secrets.

Why is it difficult to open?

If the door of the machine after washing does not open for the first and second time, do not try again, increasing the pressure and applied force. This approach will only aggravate the situation and add a broken lock or a torn door to the blocking. It is more productive to understand the reasons for the current situation, of which there may be only five.

  • Standard auto-lock while the machine is running. After the completion of the next cycle, at least 1-2 minutes should pass for Samsung machines, after which the door will open independently.
  • System crash. Possible technical violation in the washing program. Failure is provoked by sudden power surges, violations in the water supply, abrupt power outages.
  • Defective lock block. It is possible that the lock is jammed. Normal wear and tear, careless loading / unloading of the tank or rough opening of the door. all this negatively affects the locking mechanism.
  • The drain hose is blocked. In this case, the water is not drained from the tank, therefore the system does not give a signal to unlock. Even if the cycle was completed.
  • Child lock. Special protection mode can be enabled accidentally.

Look for the reason for the locked hatch is among the listed items. The most ideal option is to open the technical data sheet or instructions for the existing Samsung model and see the procedure for each case. If such papers are not found in the house, we figure out what to do next, on our own.

Opening delay

First of all, you need to slow down the ARDOr. It is likely that the machine did not break down, and someone is in a hurry to continue washing as soon as possible and forgot about the automatic closing of the hatch. This measure is a standard safety requirement, which is programmed for all manufactured front-loading washing machines. Samsung is no exception. It should take about 1-2 minutes for the drum to stop completely, the water drained and the system gave the go-ahead to open the door.

If the specified time has passed and the machine is still unavailable, proceed differently. Disconnect the washing machine from the mains and let it “rest” for half an hour. The machine could respond by blocking to sudden voltage drops, a hitch in the water supply or a slight blackout in the apartment. In thirty minutes, the system will reset the settings and open the door lock.

Important! The described methods are suitable only for unlocking the machine with an empty tank, otherwise you must act in a different way.

How to open a Samsung washing machine if it’s locked

Everyone is so accustomed to regularly using the washing machine that a suddenly locked door becomes a big tragedy and is fraught with disrupted plans. Panic is stronger if the tank is full of water and an open door threatens a real flood. But do not be in vain to lament and lose heart: in nine cases out of ten, the problem is solved by elementary actions.

over, you don’t need to call a repairman to unlock your Samsung washing machine. Maybe it’s all about the built-in security mechanism, a “glitch” in the system, or a small blockage that can be easily removed without assistance. It is not difficult to diagnose the cause on your own, and the instructions below will help with this.

Panel lock

When the anticipation is not working, you need to pay attention to the dashboard. Almost all modern cars from Samsung are equipped with a child lock option, which is activated by pressing two buttons at the same time. Each model has its own combination, but most often it consists of “Rinse” and “Temperature”.

You can find the exact set of keys in the appropriate section of the instructions or carefully examine the machine. a “lock” is drawn between the necessary buttons. It remains only to simultaneously press the keys and hold them for 10 seconds. After that, the door should open easily.

All described methods “work” only when the tank is empty. If the problem with the locked hatch is complicated by the presence of non-drained water inside the laundry, you will have to act in other ways. They will be discussed below.

Lock or handle?

Often, the desire to quickly open the hatch door ends with a damaged handle and a broken lock. This is how the machine will react to attempts by force and pressure to bypass the blockage. For those who have not calculated their power, an alternative option is offered to open the washer.

  • Measure the circumference of the door.
  • Prepare a cord with a diameter of less than 5 millimeters and a length that should be equal to the circumference of the door plus 25 centimeters.
  • Gently push the rope through the gap between the door and the body (if necessary, you can use a flathead screwdriver or other similar tool).
  • Pull slowly on both ends of the lace.

It should be understood that opening the door will not solve the problem of a broken lock mechanism. A faulty constipation will have to be replaced. In such a case, it will not be easy to cope on your own: you need to find a suitable part, partially disassemble the unit and return everything to its original places. Therefore, it is better not to experiment with repairs with your own hands and entrust the change of the lock to a specialist from the repair service.

Do not be discouraged if the machine refuses to open the door during washing. over, there is no need to panic and try to solve the problem by force: the blocking is removed quickly and easily. The main thing is to be patient and consistently carry out all the described actions. And only after trying all the options on your own and not finding a solution, you should contact a repairman for Samsung washing machines.