How To Integrate A Washing Machine Into A Kitchen Set

Stationary location

If there was no other place to install the washing machine in the kitchen, then the only possible solution is to place the appliances separately from the headset. Even with this arrangement, you can hide or harmoniously fit into the interior a freestanding Washing machine:

  • under the dining table;

How To Integrate A Washing Machine Into A Kitchen Set

  • behind a screen or curtain.

It is desirable that with this method of installation, the equipment has a very compact size, which is especially important for a small kitchen.

The downside of this location is the problematic connection to communications.

Built-in washing machines

There are several ways to install the Washing machine. The choice of one or another option will depend not only on visual preferences and aesthetic considerations, but also on the layout, cabinet dimensions and the dimensions of the machine itself.

If you are still at the stage of buying a washing machine for a ready-made headset, then your task is greatly simplified. Modern manufacturers offer Washing machines of different sizes.

Built-in Washing machine model, hidden behind the facade

You can choose a model in size that fits perfectly into the cupboard prepared for the Washing machine or into the niche under the tabletop.

There is a Washing machine on sale with the following parameters:

  • width. from 45 to 70 cm;
  • height. from 50 to high 130 cm;
  • depth. from 33 to 85 cm.

If you have already purchased a full-size typewriter, and there is no kitchen set yet, then there are only two possible solutions:

Below are several possible solutions from which you will surely choose the best one for your kitchen.

Positioning the top-loading machine

These Washing machines are very compact and easier to place permanently than front-loading models. But they are not so practical in terms of using the kitchen workspace if they need to be built in.

They can be built in under a folding table top or a wide bar counter.

Washing machine in the kitchen with different layouts

Here are some interesting ideas on how to beautifully position a stationary or built-in washing machine.

  • Corner kitchens with washing machine.
  • Linear (straight) layout.
  • U-shaped kitchen with washing machine.

Fully integrated under the worktop

Like any other built-in equipment, the front of such a machine will be equipped with special loops for attaching the facades of the headset.

Its parameters of depth, width and height are already precisely set from the beginning to the standard parameters of the lower cabinets.

The disadvantage of such an embedded washing machine is the high price and difficult access to the case in case of breakdown.

40 ways to place your washing machine in your kitchen

Installing a Washing machine in the kitchen is often a necessary measure because there was simply no room for her in the small bathroom. And sometimes such an arrangement is an intentional step, if it is convenient to place all the equipment in a house or apartment in one place.

This option for the location of the washing machine also had other advantages:

  • additional work surface. Typically, the Washing machine is placed under the countertop where you can cook;
  • a small bathroom without a typewriter will become free and convenient to use.

Washing machine in the kitchen, built-in from the end of the kitchen set

  • the need for camouflage (especially in kitchens with a classic design, where the Washing machine does not fit at all);
  • the proximity of washing powder with food;
  • the need to transfer dirty laundry to the kitchen every time you wash;
  • the need to pre-select and prepare a place for installation.

Kitchen with under-counter Washing machine

With all these inconveniences, the hostess will eventually get used to such an arrangement. Questions remain important. how to integrate a washing machine into a kitchen set so that it does not violate stylistic unity, and its use is comfortable. We will talk about this in more detail later.

Installation in a cabinet behind the facade

To build a washing machine into a wardrobe, it is necessary that the dimensions of the equipment itself and the wardrobe allow it to be placed there. All three parameters are fundamentally important here. height, width and depth.

The floor cabinet from most manufacturers can have several widths suitable for installing the Washing machine in it: 60 and 80 cm. Consequently, the width of the machine will be several centimeters less. It is important to consider here that on the left between the machine and the furniture body, it is advisable to leave a gap for the width of the cabinet door hinge. This must be done so that the powder compartment can slide forward freely.

The standard depth of a kitchen cabinet is 60 cm. When choosing a machine that is supposed to be hidden behind a cabinet door, we take into account not only the depth of the cabinet, but also measure the parameter together with the door to its very convex point. This way you can build in the Washing machine with a depth of 50-55 cm.

Despite all its complexity of installation, the built-in washing machine in the kitchen has an undoubted advantage. complete disguise of the Washing machine in the interior and preservation of stylistic unity.

Installation in a niche between cabinets, without door

A place specially prepared for the Washing machine probably already has the required height, depth and width. This method is easier, therefore it is the most common.

Most machines usually already have the correct width and depth to match the standard cabinet dimensions.

Washing machine in a small kitchen

The solution to the question of how to hide the washing machine in the kitchen with this installation option can be approached in several ways, depending on the style of the interior:

  • pick up the Washing machine and the headset in the same color scheme. Although the choice of colors for the washing machine is small, you can easily find the universal and most common white option for a white headset. It is also more common to find gray or black Washing machine models. another idea is to paint or paste over the car body with vinyl stickers in the desired color.
  • choose the Washing machine in the same style as the rest of the kitchen appliances (oven, microwave, etc.), for example, a metallic finish. This option will look good in modern styles. high-tech, loft, American, etc.
  • close with a beautiful curtain. The idea is relevant for styles in a rustic spirit (country, provence, shabby chic).
  • accentuate.

There are unusual and bright designer cars that can become an accent color in the interior. It is important here to support their design in other interior elements. For example, trim the apron in the same color.

6 important installation rules

  • It is not advisable to install the Washing machine close to other electrical appliances.
  • The drain hose filter must always be easily accessible. If it turns out that it will be closed with a plinth, then it is necessary to provide for the possibility of removing this plinth without problems if necessary.
  • The more the Washing machine is to communications, the better: both in terms of connectivity and security.
  • The Washing machine cannot be installed under the hob.
  • Do not close the back of the cabinet if the Washing machine is installed.
  • It is better if the floor is covered with ceramic tiles or porcelain stoneware, rather than laminate or parquet boards.

Technical details of the process

The connection for all embedding options follows approximately the same aLGorithm, it does not matter if you decide to embed the unit in a cabinet in the bathroom or in a kitchen set, under a countertop or under a sink. In any case, you should proceed in stages:

  • Think over a way to connect to the water supply.
  • Create a waste water outlet.
  • Make electrical wiring (it is advisable to install a moisture-resistant outlet).
  • Make sure that all specified communications can be connected to the machine.
  • Check the length of the hoses and the power cord so that the device can be conveniently pulled out of the niche in which it is located.
  • Connect the unit to the water supply and sewer pipe.
  • Push the machine into the designated place, fix the legs.

When installing a washing machine under the countertop, it is necessary to carefully calculate the dimensions of the future niche. There should be a gap of 3-5 cm between the unit and the walls of the furniture, so that during vibration there is no unnecessary noise.

Built-in appliances can be an attractive design element in a kitchen or bathroom. If you show your maximum imagination, you will be able to turn the disadvantages of the room into advantages, and the result of the work performed will pleasantly surprise you.

Pros and cons of placing appliances in the kitchen and bathroom

Each housewife decides for herself where it will be better to install the machine: in the kitchen or in the bathroom. However, the location is often determined by the capabilities of the room. If the bathroom is not very large, then a rational solution would be to place the washing machine in the kitchen. Some people are categorically against installing the unit in the room where food is prepared, so they are ready to go to any tricks so that the machine fits harmoniously into the bathroom.

From a technical point of view, it is possible to highlight both the pros and cons of placing the unit in the named premises. Installing a washing machine in the kitchen has the following advantages:

  • concentration of all household appliances in one room. So the hostess can easily control both the cooking process and the washing, which will significantly save time and effort for other household chores;
  • freeing up space in the bathroom, which is often small. Having built the washing machine into the kitchen set, you can count on the convenience of carrying out hygiene procedures in the sanitary zone of the apartment.

The advantages of this solution are obvious, but there are also disadvantages of placing the machine in the kitchen space:

  • limited possibilities for storing dirty linen, detergents, etc. You will either have to wear the necessary attributes from the bathroom, which is not very convenient, or find an additional niche for placing dirty things and powders;
  • violation of the design of the room. If you build a washing machine under the countertop and do not close the facade with anything or constantly leave the door open to dry the drum, this can violate the integrity of the kitchen interior;
  • storage of washing powders near food is unacceptable, because particles of synthetic substances can settle on food, which adversely affects human health.
READ  What Do The Icons On The Bosch Washing Machine Mean

If the disadvantages of installing a washing machine in the kitchen turned out to be more than convincing for you, you should familiarize yourself with the advantages and disadvantages of embedding the unit in the bathroom in order to make a final decision. The advantages are obvious:

  • saving space in the kitchen;
  • the bathroom is ideal for storing detergents and dirty linen;
  • a machine built in the bathroom will not distract from other household chores with noise;
  • you can constantly keep the hatch door open and this will not violate the aesthetics of the room.

The disadvantages of placing a typewriter in the bathroom are as follows:

  • high humidity in the room can cause damage to the appliance. The unit should be installed only after a detailed thought over the connection diagram and with reliable wiring;
  • limited range of equipment. It is not so easy to find a typewriter in an old-style bathroom, because the width of the doorway often does not exceed 55-60 cm.In this case, a full-sized model 60 cm wide will not fit through the door and the user will have to choose from a number of smaller devices.

Before installing a washing machine in any of the premises, it is important to weigh all the pros and cons and choose for yourself which of the rooms it will be located in most organically.

Which machine is suitable for embedding?

Having decided on the location in the house, you can start choosing a washing machine. From the point of view of the possibility of embedding, the units are divided into three groups: full-sized (free-standing), with the possibility of partial embedding and fully recessed. Even a full-sized model can be successfully fitted into the interior by choosing the best way.

The easiest way is to build in a built-in washing machine. Usually it is installed in a specially designated niche in the kitchen unit. The upper part is closed with a table top and plays the role of a cover, and the front part is hidden behind a panel or door fixed on special hooks-fasteners. in such models they are provided by the manufacturer.

If the unit has the designation “built-in” in its specifications, it does not have front mountings. Such models have only a removable top cover. The machine can be installed in a kitchen set, and the door can be attached not to the body of the device, but to the side walls of the furniture. A full-sized unit is placed under the countertop or in the kitchen cabinet, if the furniture can be adjusted to the parameters of the device.

When choosing a washing machine for both the kitchen and the bathroom, most buyers are guided not by the possibility of embedding, but by the dimensions of the model.

Today, a large number of compact models of washing machines are offered on the home appliance market. Narrow machines with a depth of no more than 32-45 cm are popular.You can also find a model no more than 65 cm high, which allows you to build appliances under the sink in the bathroom.

When choosing a washing machine, you should also pay attention to the method of loading the laundry. There are models with vertical or front loading. The first option is compact, because their width is about 20-25 cm less than that of standard front models. But, unfortunately, it is irrational to build vertical machines into a kitchen set, because their upper part cannot be closed with a stationary countertop and used as a work surface. Alternatively, you can make a folding tabletop, as shown in the photo below.

How to build a built-in washing machine: features, methods

A washing machine is a necessary technique in every home, but it is not always possible to find a suitable place for it. Usually the unit is installed in the bathroom, but if there is a shortage of space in the bathroom, the device can be placed in the kitchen or even in the hallway. The best solutions for small spaces are to integrate the washing machine under a countertop, under a sink or in a kitchen set. Next, we will consider in which room it is better to install the machine, is it possible to build in full-sized equipment and what needs to be considered when connecting the device to communications.

Ways to build in a washing machine

The easiest way to place it is to simply place the device in an empty space. If there is such a corner in the bathroom or in the kitchen, there will be no difficulties with the installation of equipment: it is enough to connect the unit to the necessary communications and you can start washing.

In the kitchen, two options for embedding look most organically: partially. under the countertop or completely. in the kitchen set. In the first case, it is important to consider the color of the washing machine. The interior of the kitchen looks stylish, in which the washing machine is matched to the tone of furniture and appliances: a microwave oven, refrigerator, stove, etc.

The most successful way from the point of view of design solutions is to hide the unit in the kitchen furniture. The question of how to integrate a washing machine into a kitchen set worries many modern users. Full embedding assumes stationary placement without the possibility of movement. A front-loading built-in machine is ideal for this task. It is important not to block access to the drain filter, otherwise you will have to regularly remove the base for cleaning.

If you decide to install the machine from the front side of the headset, you need to match the width of the washing machine and the depth of the kitchen cabinets.

If you are wondering how to integrate a washing machine into the kitchen, we suggest watching the following story:

A young housewife, immersed in the upbringing of children and home life. As a mother, she can quickly figure out what to do with the child, as a wife. to cook a delicious three-course dinner, as a hostess. to create coziness and comfort in the house. I am glad to share with our readers life hacks that can facilitate homework and save time for your favorite work and travel.

Found a bug? Select the text with the mouse and click:

Threads made of gold and silver, with which clothes were embroidered in the old days, are called gimp. To obtain them, the metal wire was pulled for a long time with pliers to the state of the necessary fineness. Hence the expression “pull (breed) gimmick”. “engage in long monotonous work” or “delay the execution of the case”.

The dishwasher is not only good for dishes and cups. It can be loaded with plastic toys, glass lampshades and even dirty vegetables, such as potatoes, but only without the use of detergents.

There are special traps to fight moths. The pheromones of females are added to the sticky layer with which they are covered, attracting males. Sticking to the trap, they drop out of the reproduction process, which leads to a decrease in the moth population.

Before removing various stains from clothes, you need to find out how safe the selected solvent is for the fabric itself. It is applied in a small amount to an inconspicuous area of ​​the thing from the wrong side for 5-10 minutes. If the material retains its structure and color, you can move on to stains.

Stretch ceilings made of PVC film are capable of withstanding from 70 to 120 liters of water per 1 m 2 of their area (depending on the size of the ceiling, the degree of its tension and the quality of the film). So you don’t have to worry about leaks from the neighbors on top.

It is easiest to remove scale and carbon deposits from the soleplate with table salt. Sprinkle a thick layer of salt on the paper, heat the iron to the maximum and press the iron several times over the salt pad using light pressure.

The habit of using the washing machine “sparingly” can lead to an unpleasant odor in it. Washing at temperatures below 60 ℃ and short rinses allow fungi and bacteria from dirty clothes to remain on the inner surfaces and actively multiply.

Fresh lemon is not only suitable for tea: clean the dirt from the surface of the acrylic bathtub by rubbing with half a cut citrus, or quickly wash the microwave by placing a container with water and lemon slices in it for 8-10 minutes at maximum power. The softened dirt will simply be wiped off with a sponge.

If the first signs of bearing in the form of untidy pellets appeared on your favorite things, you can get rid of them using a special machine. a shaver. It quickly and efficiently shaves off clumped fabric fibers and makes things look worthy.

How to build a washing machine in the kitchen: stages of work

The washing machine is an integral part of the modern home. At the same time, the layout of many apartments does not always allow for aesthetically pleasing and practical installation of a washing machine. Sometimes people who live in small apartments have to choose compact options for devices or install a typewriter in a cramped bathroom or in a free space in the kitchen space. This approach is irrational, since the area of ​​the kitchen or bathroom workspace is additionally occupied. From the point of view of aesthetics, a free-standing unit with open communications does not add anything pleasant to the design of the room.

Diagram of embedding a washing machine in the kitchen.

The best and at the same time rational solution to the problem of choosing a place for installing a washing machine is to build it into a kitchen set. How to integrate a washing machine into the kitchen and still get the desired result? This requires you to understand certain subtleties of such work.

Variety of machines for embedding

There are two basic versions of any automatic washing device. These are freestanding and recessed options.

Washing machine connection.

Freestanding washing machines are a classic version of household appliances and can be installed anywhere without being tied to furniture structures, at the same time they allow their installation in furniture structures of a given size or between two furniture boxes.

READ  Washing Machine Samsung Error Ue What Does It Mean

Built-in washing units have their own specific characteristics. They are intended for built-in use only. The advantage of such structures is that, with the same technical parameters, built-in devices are most accurately mounted in furniture cabinets, while they allow you to completely hide your presence there, and also due to technological subtleties, there are no inconveniences during operation, as when building in freestanding machines.

  • Variety of machines for embedding
  • Methods for embedding washing machines in a kitchen set
  • The main stages of work
  • Atypical cases of equipment installation
  • List of required tools

Methods for embedding washing machines in a kitchen set

The washing machine can be built in an open way, when the front of the machine is not closed by the facade, and closed, when it is completely hidden by the facade of the kitchen unit. The second option is the most preferable, as it does not violate the integrity of the kitchen furniture. However, in order to make a hidden installation, you need to make sure that the dimensions of the device and the furniture cabinets match. For example, freestanding full-size washing machines in most cases have a depth of about 57 cm.over, due to protruding controls, the loading door cover, this value may increase.

The location of the washing machine in the kitchen.

The depth of the kitchen cabinet-table varies within 56-59 cm, the depth of the countertop is 60 cm. Therefore, it is not always possible to build in a classic full-size machine in such a way that its front part is covered with a facade. It is important to remember here the permissible distance between the back of the machine and the wall, and the communication hoses should not be firmly pressed to anything.

To embed a full-size machine in a kitchen set, it is better to choose a built-in type device. Due to their geometric dimensions, they can be installed taking into account the front door. As a rule, the front door is attached directly to the machine body, for this there are corresponding fasteners. This fact allows you to minimize the gap and achieve the necessary compactness. Washing machines with reduced depth allow easy installation in any way.

A free-standing version of washing units is usually installed between two adjacent boxes of cabinets, if at the same time there are front doors in the project, then they are attached to the outside of their case. Sometimes the headset project provides for a separate cabinet for the typewriter. The top cover of most devices is removable, this allows you to put the machine body under the tabletop.

When drawing up a kitchen project that contains built-in washing appliances, the following aspects must be considered:

  • hassle-free access to water communications;
  • the convenience of the location of the machine in the kitchen space (the dominant role is given to the main purpose of the kitchen);
  • hard floor covering at the place of installation of the machine;
  • possibility of service or emergency maintenance.

Washing machine dimensions.

It is advisable, if the area of ​​the kitchen allows, to carry out the installation sites of washing machines and ovens. This will avoid temperature extremes and possible overheating. If this is not possible, then it is necessary to install a heat-insulating screen between the body of the machine and the oven.

The kitchen must be equipped with wiring that meets the requirements for connecting the electrical parts of the machines. All work on laying or changing communications and electrical lines must be carried out before installing the headset and take into account the future location of the washing machine.

The main stages of work

After agreeing on the project and installing the kitchen set, the installation of the device is carried out directly. Fully built-in equipment, as a rule, during the installation process provides for the presence of a furniture base at the bottom of the machine. For this, there is a special recess on the body. Height is adjustable with special legs. The front door is attached to the machine body with special hinges. Connection to communications is carried out in the same way as the connection of classic devices.

The integration of a freestanding machine into a headset begins by removing the top cover. Sometimes the top of the case is covered with a special plate that comes with the kit. Next, all the overall dimensions of the niche are checked and made sure that they are in exact accordance with the dimensions of the built-in machine.

Washing machine hose connection diagram.

After that, the connection of the water supply and sewer drain is carried out. It is advisable to take into account the length of the supply hoses when calculating the water communications, that is, there must be a certain margin that will allow, if necessary, to pull the washing machine out of the headset, without disconnecting the pipelines.

The pressure hose is connected to the water main using a tee, which is installed in a convenient place where there are threaded connections, for example, at the point where the mixer hose joins the cold water pipeline. A shut-off valve is installed between the outlet of the tee and the pressure hose of the machine. It is possible to install a tee directly into the line by welding into a plastic water pipe or using a fitting connection.

The drain hose can be connected in two ways. In the first case, a special drain siphon is required in the kitchen sink, which has an outlet for connecting a hose. In the second case, a tee is inserted into the sewer plank bed passing through the kitchen, and a drain pipe is connected to it. It is important to remember here that before entering the sewer, the drain hose must have a knee-like bend with a height of 45-50 cm.

The layout of the sockets when connecting the washing machine.

The electrical part includes the presence of a power outlet or a residual current device in the apartment circuit. If there is none, then it is possible to install a special socket into which an RCD is built. It is important to remember about grounding, if it is not provided for in the project of the house, then the presence of an RCD is mandatory, and the grounding of the ground allotment is strictly prohibited.

After connecting the communications, the washing machine is pre-installed in the headset niche; during the installation process, the location of the hoses is monitored, while avoiding their kinks. Then a test switching on of the device is carried out, an inspection is conducted for leaks. After that, the machine is finally installed, keeping the level. At the final stage, front doors are hung if they are provided for by the project.

Sometimes the order of work can change, this is due to some points and features of assembling the headset. For example, connection to pipelines can occur after installing the device in a headset, through adjacent cabinets. This is not a very good installation option.

Atypical cases of equipment installation

It is best to plan the installation of a built-in washing machine with a project and installation of a new kitchen set.

Final installation of the washing machine.

But in some cases, it is possible to integrate the device into a headset that did not provide for the presence of the device. This will require the willingness and ability to lose any floor tables. If the dimensions of the vacant niche correspond to the dimensions of the device, then the installation is possible. In some cases, you can even pick up and install front doors that hide the device in the headset. In any case, this is an individual decision and depends on many factors.

List of required tools

  • Roulette, level, screwdriver.
  • Open-end wrench set (adjustable wrench).
  • Screwdriver.
  • FUM tape.
  • Pliers, scissors, knife, electrical tester.

You can build a washing machine in the kitchen yourself. The result of the work performed on the installation of the washing machine depends on the kitchen project, which must take into account the desired dimensions of the device. In small rooms, it is important to match the size of the device with the usable volume of the floor-standing cabinets.

Variety of machines for embedding

There are two basic versions of any automatic washing device. These are freestanding and recessed options.

Washing machine connection.

Freestanding washing machines are a classic version of household appliances and can be installed anywhere without being tied to furniture structures, at the same time they allow their installation in furniture structures of a given size or between two furniture boxes.

Built-in washing units have their own specific characteristics. They are intended for built-in use only. The advantage of such structures is that, with the same technical parameters, built-in devices are most accurately mounted in furniture cabinets, while they allow you to completely hide your presence there, and also due to technological subtleties, there are no inconveniences during operation, as when building in freestanding machines.

How to integrate a washing machine into the kitchen?

The washing machine is an integral part of the modern home. At the same time, the layout of many apartments does not always allow for aesthetically pleasing and practical installation of a washing machine. Sometimes people who live in small apartments have to choose compact options for devices or install a typewriter in a cramped bathroom or in a free space in the kitchen space. This approach is irrational, since the area of ​​the kitchen or bathroom workspace is additionally occupied. From the point of view of aesthetics, a free-standing unit with open communications does not add anything pleasant to the design of the room.

Diagram of embedding a washing machine in the kitchen.

The best and at the same time rational solution to the problem of choosing a place for installing a washing machine is to build it into a kitchen set. How to integrate a washing machine into the kitchen and still get the desired result? This requires you to understand certain subtleties of such work.

Methods for embedding washing machines in a kitchen set

The washing machine can be built in an open way, when the front of the machine is not closed by the facade, and closed, when it is completely hidden by the facade of the kitchen unit. The second option is the most preferable, as it does not violate the integrity of the kitchen furniture. However, in order to make a hidden installation, you need to make sure that the dimensions of the device and the furniture cabinets match. For example, freestanding full-size washing machines in most cases have a depth of about 57 cm.over, due to protruding controls, the loading door cover, this value may increase.

The location of the washing machine in the kitchen.

The depth of the kitchen cabinet-table varies within 56-59 cm, the depth of the countertop is 60 cm. Therefore, it is not always possible to build in a classic full-size machine in such a way that its front part is covered with a facade. It is important to remember here the permissible distance between the back of the machine and the wall, and the communication hoses should not be firmly pressed against anything.

READ  How To Remove Mold From Washing Machine

To embed a full-size machine in a kitchen set, it is better to choose a built-in type device. Due to their geometric dimensions, they can be installed taking into account the front door. As a rule, the front door is attached directly to the machine body, for this there are corresponding fasteners. This fact allows you to minimize the gap and achieve the necessary compactness. Washing machines with reduced depth allow easy installation in any way.

A free-standing version of washing units is usually installed between two adjacent boxes of cabinets, if at the same time there are front doors in the project, then they are attached to the outside of their case. Sometimes the headset project provides for a separate cabinet for the typewriter. The top cover of most devices is removable, this allows you to put the machine body under the tabletop.

When drawing up a kitchen project that contains built-in washing appliances, the following aspects must be considered:

  • hassle-free access to water communications;
  • the convenience of the location of the machine in the kitchen space (the dominant role is given to the main purpose of the kitchen);
  • hard floor covering at the place of installation of the machine;
  • possibility of service or emergency maintenance.

Washing machine dimensions.

It is advisable, if the area of ​​the kitchen allows, to carry out the installation sites of washing machines and ovens. This will avoid temperature extremes and possible overheating. If this is not possible, then it is necessary to install a heat-insulating screen between the body of the machine and the oven.

The kitchen must be equipped with wiring that meets the requirements for connecting the electrical parts of the machines. All work on laying or changing communications and electrical lines must be carried out before installing the headset and take into account the future location of the washing machine.

The main stages of work

After agreeing on the project and installing the kitchen set, the installation of the device is carried out directly. Fully built-in equipment, as a rule, during the installation process provides for the presence of a furniture base at the bottom of the machine. For this, there is a special recess on the body. Height is adjustable with special legs. The front door is attached to the machine body with special hinges. Connection to communications is carried out in the same way as the connection of classic devices.

The integration of a freestanding machine into a headset begins by removing the top cover. Sometimes the top of the case is covered with a special plate that comes with the kit. Next, all the overall dimensions of the niche are checked and made sure that they are in exact accordance with the dimensions of the built-in machine.

Washing machine hose connection diagram.

After that, the connection of the water supply and sewer drain is carried out. It is advisable to take into account the length of the supply hoses when calculating the water communications, that is, there must be a certain margin that will allow, if necessary, to pull the washing machine out of the headset, without disconnecting the pipelines.

The pressure hose is connected to the water main using a tee, which is installed in a convenient place where there are threaded connections, for example, at the point where the mixer hose joins the cold water pipeline. A shut-off valve is installed between the outlet of the tee and the pressure hose of the machine. It is possible to install a tee directly into the line by welding into a plastic water pipe or using a fitting connection.

The drain hose can be connected in two ways. In the first case, a special drain siphon is required in the kitchen sink, which has an outlet for connecting a hose. In the second case, a tee is inserted into the sewer plank bed passing through the kitchen, and a drain pipe is connected to it. It is important to remember here that before entering the sewer, the drain hose must have a knee-like bend with a height of 45-50 cm.

The layout of the sockets when connecting the washing machine.

The electrical part includes the presence of a power outlet or a residual current device in the apartment circuit. If there is none, then it is possible to install a special socket into which an RCD is built. It is important to remember about grounding, if it is not provided for in the project of the house, then the presence of an RCD is mandatory, and the grounding of the ground allotment is strictly prohibited.

After connecting the communications, the washing machine is pre-installed in the headset niche; during the installation process, the location of the hoses is monitored, while avoiding their kinks. Then a test switching on of the device is carried out, an inspection is conducted for leaks. After that, the machine is finally installed, keeping the level. At the final stage, front doors are hung if they are provided for by the project.

Sometimes the order of work can change, this is due to some points and features of assembling the headset. For example, connection to pipelines can occur after installing the device in a headset, through adjacent cabinets. This is not a very good installation option.

Atypical cases of equipment installation

It is best to plan the installation of a built-in washing machine with a project and installation of a new kitchen set.

Final installation of the washing machine.

But in some cases, it is possible to integrate the device into a headset that did not provide for the presence of the device. This will require the willingness and ability to lose any floor tables. If the dimensions of the vacant niche correspond to the dimensions of the device, then the installation is possible. In some cases, you can even pick up and install front doors that hide the device in the headset. In any case, this is an individual decision and depends on many factors.

List of required tools

  • Roulette, level, screwdriver.
  • Open-end wrench set (adjustable wrench).
  • Screwdriver.
  • FUM tape.
  • Pliers, scissors, knife, electrical tester.

You can build a washing machine in the kitchen yourself. The result of the work performed on the installation of the washing machine depends on the kitchen project, which must take into account the desired dimensions of the device. In small rooms, it is important to match the size of the device with the usable volume of the floor-standing cabinets.

Installation tools

  • Fasteners;
  • Roulette;
  • adjustable wrench;
  • FUM tape;
  • Detector screwdriver;
  • Stationery knife.

How to integrate a washing machine into the kitchen

Modern solutions in the arrangement of residential buildings allow very functional and ergonomic arrangement of objects, which provides unprecedented comfort from their use. One such example is built-in appliances in the kitchen. So, many today decide to build, for example, a washing machine. This allows you to integrate third-party equipment into the headset as much as possible, as well as free the bathroom from the traditional presence of this bulky unit in it.

Thus, even at first glance, quite a few advantages emerge, so it is worth considering the question of how you can build a washing machine yourself.

Top-loading device

With this design, it will be easier to build in equipment than with front loading. Basically, such models are chosen if the space in the kitchen is very limited. After all, such a washing machine can fit even in a tight room. Its width is 40 cm.

It is convenient to hide such a device in a headset.

About embedded technology

Unfortunately, we have to admit that not all equipment can be built by hand. After all, the same microwave oven differs from the washing machine in the level of installation complexity, since for the latter case more skills are required. Therefore, it is worth soberly weighing your strength.

It should be noted that the kitchen is a great place to install a washing machine. It is enough just to look at the photo examples to see how it looks harmoniously. Built-in washing machine is a neat appearance and convenient use.

Training

First of all, you should choose the right model, taking into account the dimensions of the existing kitchen. Of course, it’s best to aim for the most popular sizes. This will be a more versatile option.

You also need to consider that there are models of top-loading washing machines. This design will require a different installation. It is covered from above by a table top that can replace the top panel.

Mounting options

In general, you can install the device in several ways. For example, it can be placed inside the box of the finished headset. In this case, the device will be closed by a cabinet or cabinet door. Another option is placement in a place you like.

Horizontal loading device

If there is enough free space in the kitchen, you can build in a structure with a horizontal load of linen. The built-in model is installed under the worktop. If in this case there are difficulties with opening the container for the powder, it can be immediately poured into the drum. This will not affect the washing process, but it will be more convenient to use the machine.

To build a “washing machine” under the countertop, you need to push it behind the visor, and then screw the door onto the cabinet. Open the door to load the laundry.

60 cm is the standard machine width. Consequently, the compartment for it should be more than 65 cm.The depth can be selected, taking into account the needs, because there are various parameters on the market.

If it turns out that the height of the machine is greater than the height of the table top, you can remove its top cover.

When the place for the device is prepared, you need to connect to the power supply, sewerage and water supply. Make sure that hoses and wires are not pinched. The machine can be moved under the table top by leveling. This is very important, because in such a limited space the car must be motionless.

Next, you need to check the performance of the device. Check the joints for leaks. If any shortcomings are found, they should be immediately eliminated. It is better to spend more time and effort at the initial stage than to deal with them periodically.

If done correctly, the resulting embedded design will work without problems for a long time. At the same time, the harmony in the kitchen will not be disturbed, as well as functionality.