How Much Citric Acid Does A Washing Machine Need

How effective is citric acid for cleaning a washing machine?

Causes of the washing machine getting dirty and their possible consequences:

  • The main cause of equipment breakdown is water. Unfortunately, it is very tough in our water supply system and contains a huge amount of impurities. Banal rust, scale, all kinds of insoluble salts and chemical compounds. all of this is in the water and can cause unwell or undermine our health. However, such water also negatively affects household appliances. Of course, you can put a filter for drinking, however, to protect the washing machine in this way, you will have to go broke.
  • The detergents we use for washing can also cause breakages. After all, some brands literally “stuff” their products with various chemicals, which in excess can also harm technology.
  • The maximum operating mode of the washing machine. Constant 80. 90 ° C during washing, increase the rate of scale formation.
  • Washing machines get dirty faster if you wash things with fluff or lint, as well as fairly old things in them. Microvilli and particles together with limescale remain on the heating element. And this, in addition to disabling equipment, also increases energy consumption.

Lime deposits are very easy to form. When the water containing the dissolved salts is heated, the latter decompose, forming carbon dioxide and sediment. This precipitate falls directly on the heating element.

Scale is mainly due to calcium carbonate. Carbonates enter the water supply system from groundwater and are the main culprit for scale formation. The increased temperature contributes to the decomposition of salts dissolved in water and the formation of lime deposits.

Why scale is dangerous:

  • First of all, scale is very dangerous for human health. If tap water contaminates equipment and pipes so much, then one can only imagine what is deposited in the body of a person who uses untreated tap water. At the same time, diseases themselves can be various, including kidney stones!
  • However, scale is harmful not only to human health, but also to technology. The most unpleasant thing is that the electric heater simply burns out. This happens because solid deposits do not conduct heat well. Tubular Heater, covered with a layer of limescale, transfers heat less well to water. As a result, it turns out that the water heats up slowly, and the heating element heats up to the maximum and works in this extra mode for a long time, and at some point it burns out.
  • Destructive corrosion processes often develop under a layer of scale, which means that the equipment will serve you less.
  • A layer of scale can cause blockages in pipes, especially in places where bends are.
  • In addition, as solids build up, power consumption will increase, which will significantly hit your .

Citric acid cleaning

Scale can be easily removed at home using citric acid. Descaling with citric acid occurs as a result of an acid reaction between the deposited salts (scale) and, accordingly, the acid.

If you want your washing machine to last for a long time, you will have to regularly clean it. And both inside and outside.

The above tool will help you with this.

External cleaning:

  • Remove external dirt with a sponge and dishwashing liquid.
  • Pay attention to the handle. this is where a lot of dirt accumulates.
  • You can walk in hard-to-reach places with a toothbrush and a cotton swab.
  • Remove and wash the powder container.

Such cleaning is no less effective if it is also carried out with the help of citric acid. For this, a moistened sponge must be dipped in dry citric acid or a weak acid solution must be prepared in advance. Citric acid is great for removing dirt stains and old yellow stains that appear on the machine over time. After that, the panels must be wiped dry.

How to care for your washing machine?

  • Before washing, be sure to check s for small items, paper.
  • Do not overload the machine with clothes.
  • After washing, wipe the drum and leave the lid open.
  • Don’t buy powder of questionable reputation.

Prevention of scale and mold:

  • Do not leave clean laundry in the machine for a long time so as not to provoke the development of mold.
  • After washing, you should not be lazy, but thoroughly wipe the drum with a dry cloth. Remember to regularly remove the tray, wash it and dry it. To prevent scale from settling on parts of the machine, wash at rather low temperatures. up to 50 0C. After all, the lower the temperature, the less scale deposits on the heating element.
  • Do citric acid prophylaxis regularly, but at least twice a year.
  • Include an additional rinse. this way you will surely rinse the additives added to the powder completely out of the machine. If the funds remain in the machine, bacteria and mold will develop.
How Much Citric Acid Does A Washing Machine Need

How to get rid of mold?

The main cause of mold formation is moisture. That is why it is so important to wipe all the elements of the washing machine dry after work. If mold does appear and, moreover, is accompanied by an unpleasant odor, then you can easily get rid of it.

Soda is mixed with water in equal proportions and the surface is treated with this solution from the inside, especially paying attention to the rubber seal. This procedure is performed once a week. The second method is washing with citric acid, which also kills mold.

At the same time, a single wash will help get rid of mold and scale, in which the same amount of bleach is added to half a glass of citric acid. Please note that the smell will be quite strong, so it is better to provide good ventilation.

It is not recommended to use this method more often than once a quarter.

Other methods:

The manufacturer sells it at a price 3 times the actual cost of the components. In addition, it is not recommended to use such a product regularly, as a hard layer is formed from its use, as a result of which the Tubular Heater can also quickly burn out.

Cleaning the filter and drum

The filter prevents dirt from clogging the hose. That is why a large amount of debris and hair accumulates on it, which must be removed regularly so that mold and unpleasant odors do not appear. In addition, a clogged filter can lead to poor water circulation, and in extreme cases, to a real flood.

Check the filter at least once every 3 months. Before removing it from the machine, you must drain the water from the hose. Only after that, the filter is removed, not forgetting to put a rag, and cleaned. The filter can be soaked for half an hour in a citric acid solution: as a result, dirt is removed efficiently and effortlessly.

Pay particular attention to cleaning the drum. It is here that lime deposits are deposited, which are the main cause of damage to the washing machine.

In order to keep it clean, you must use either specially purchased products or citric acid, which is poured into a container for powder.

You will need:

  • lemon acid;
  • soft cloth;

Advice! It makes no sense to use lemon juice for descaling for the simple reason that the acid in lemon is contained in an extremely low concentration, which means that effective cleaning cannot be carried out.

How to clean your car:

  • Make sure there are no items left in the machine before cleaning. The fact is that citric acid can easily corrode along with plaque and tissue.
  • Place 50-70 g of citric acid in the powder compartment. You can also put it straight into the drum: the cleaning effect will not be diminished in the least.
  • Put the machine on continuous operation at maximum temperature: about 90-95 0C. Set this temperature if you have never, or for a very long time, never cleaned the machine and think that a large amount of scale has accumulated on the Tubular Heater. If you take care of the equipment regularly, then it is enough to select the mode 50-60 0C.
  • At the end of the process, open the machine and check it and drain for limescale deposits. The fact is that some large pieces of limescale can simply get stuck and have to be removed mechanically.
  • If it seemed to you that there is no effect, you can increase citric acid for washing up to 150g.
READ  What Do The Icons On The Bosch Washing Machine Mean

As a preventive measure, it is recommended to carry out such a procedure every 3-4 months.

Method advantages:

  • Cheap.
  • Safely.
  • Effectively.
  • Available.

Reviews

Svetlana: “I have long ago adopted the cleaning of my car with citric acid. Minimum effort and cost and savings on calling the master. I try to carry out prevention every month. ”

OLGa: “Incredible! I didn’t believe in the effectiveness of such a simple method until I finally tried it myself: there were pieces of scale in the drain pipe and in the drum itself after cleaning. I imagine that all this was inside the washing machine! ”

Valentina: “After the last call of the master at home 2 years ago and the demonstration to me of what turned out to be at the Tubular Heater, I seriously thought about how to take care of the equipment. I chose citric acid, as it turned out to be really effective for little money. Now I try to carry out the cleaning procedure regularly so as not to bring the equipment to breakdowns. “

Tonya: “And my mother told me a trick with citric acid. She always cleans the car like that and knows the hassle with it. So I myself also do this kind of prevention once a year. Although, apparently, it would be necessary to hold it more often. “

How to clean the cooling system with citric acid

Cleaning the cooling system of a citric acid car is an extremely effective method. Unless, of course, they are abused.

Whatever antifreeze you use, dirt gradually accumulates in the cooling system and sludge appears. This is due to corrosion processes, as well as chemical reactions.

The rate of sludge and sludge formation increases if you add water or other antifreeze to the radiator, or if you change the coolant without first flushing. As a result, an insufficient quality composition splashes inside the system, and the pipes are clogged with bloom, which is getting stronger day by day.

How often to flush the citric acid radiator

As you already understood, it is not necessary too often. Still, citric acid is an acid, and acid not only eats away deposits, it also reduces the elasticity of soft elements. Under its influence, rubber and plastic parts dry out faster.

If the car is new, then the first serious flushing should be carried out no earlier than 3-4 years after buying the car. If you have changed the antifreeze or added an unknown fluid, it is better to flush the radiator after 3 years. If you used only “native” antifreeze, then flushing can be done after 5 years.

Engine Cooling System Flush: Citric Acid Cleaner

As mentioned above, the need to flush the cooling system can arise for various reasons. As a rule, the reason for flushing can be considered cases when:

  • antifreeze has darkened or dimmed in the expansion tank;
  • in antifreeze, “flakes” of scale, lumps of dirt are noticeable;
  • the engine began to overheat regularly;
  • the cooling fan operates frequently;
  • there are problems with the operation of the thermostat;
  • the interior heater (stove) does not work correctly, etc.

It is not difficult to guess that ignoring these symptoms will soon lead to a more serious overheating of the internal combustion engine, which, in turn, will disable the engine. At the same time, a number of simple and accessible actions allow you to solve an existing problem in advance with your own hands, as well as in the future to avoid undesirable consequences.

It should be added to this that the harmful effect of such a cleaner on the cooling system itself is likewise minimized. This means that citric acid, if used correctly, is not capable of harming parts, rubber pipes, seals, etc. In other words, the composition can be safely used to clean radiators, regardless of the material of their manufacture (aluminum, brass).

It is also worth highlighting the availability of the method, since citric acid is a cheap product, especially when compared with ready-made special cleaners for the cooling system of different domestic and foreign manufacturers. The main thing is that the car owner needs to know how to prepare a flush and flush the cooling system with it. In other words, you need to understand in what proportions to mix citric acid and water.

It should be noted that the proportions of citric acid in the solution for flushing the cooling system are arbitrary. over, the opinion of many motorists on this matter is somewhat different. However, one should not jump to conclusions, since it is a mistake to believe that the more acid, the better.

If you remember that for descaling in everyday life (for example, in a kettle), 1 sachet of 30g is enough. for a couple of liters of water, then we can conclude that 5 liters. 70g will be enough. citric acid, that is, for one cleaning cycle, it is advisable to immediately buy a large package of 80 g.

If the cooling system is very dirty, then it is quite possible that it will have to be cleaned several times to achieve the proper effect. This means that you need to have at least two or even three large packages in stock.

How to clean the cooling system with citric acid

If we talk about the washing procedure itself, then you should prepare water, citric acid, and also stock up on time. The process is not complicated, however, it may well turn out to be laborious.

  • Please note that you need to use distilled water to prepare the wash, not running water. As a last resort, ordinary tap water must be boiled well, and only then mixed with acid and poured into the cooling system.
  • For effective mixing of water and acid, you need to take about 0.5 liters of water in a separate container, then this water should be boiled. After the water starts to boil, citric acid is poured. This allows the acid to dissolve well. The resulting solution is then cooled. After that, you can pour the finished solution into the main volume of water, then stir again.
  • Further, antifreeze or antifreeze can be drained from the cooling system, assessing the degree of pollution and condition by appearance (color, odor, impurities, etc.). If the antifreeze or antifreeze is very dirty, then the water-acid solution should be saturated (about 80 g of acid per 5 liters of water). If the antifreeze is relatively clean, then 40-50g will be enough.
  • Now, instead of antifreeze, flushing is poured into the expansion tank, the engine needs to be started and warmed up to operating temperatures at XX (until the thermostat opens and the cooling fan turns on).
  • Usually, for cleaning, the motor runs for about 10-15 minutes, you can also additionally turn it off at idle. At the end, the engine must be turned off.
  • After the internal combustion engine has cooled down a little (15-20 minutes), the solution can be drained. In parallel, one should evaluate its color, condition, etc. If dirt is visible, then the flushing procedure must be repeated, pouring a fresh portion of the cleaner into the system.
  • An indication that the system is cleaned will be a clean flush that is being drained. Then you should flush the system 2-4 more times with distilled water, but without acid. Now you can fill in fresh antifreeze or antifreeze.

How to flush a radiator with citric acid

Citric acid is a cheap way to flush. For a 10 liter bucket of distilled water, 200 g of citric acid powder is enough.

First you need to completely drain the antifreeze. And at the same time see what flows out with him. If there is a lot of dirt and mechanical particles in the “return”, it is not in vain that you started flushing.

After draining the antifreeze, fill the system with a citric acid solution, run the engine at idle for about 10 minutes. Better yet, if you go somewhere. Then citric acid will better wash all the internal parts of the system.

Then the composition must be washed off. Preferably in the pallet to see what comes out of there again. If there is still a lot of dirt, it is better to repeat the cleaning.

After all, it is worth rinsing the system with distilled water and only then pouring new antifreeze.

Rules for using citric acid:

It cannot be used too often.

You can not make a more concentrated solution.

It is better to flush in the warm season so that the composition in the system does not freeze.

The water for the solution and the final rinse should be exactly distilled, since it contains the least salts.

How much citric acid is needed to clean the radiator. The proportions of flushing the engine cooling system with citric acid. Folk secrets

About every 2 years, many motorists begin to remember the proportions of flushing the engine cooling system with citric acid. Despite the abundance of all kinds of chemicals created for this purpose and advertised by manufacturers, folk proven methods remain in the lead.

READ  How To Integrate A Washing Machine Into A Kitchen Set

First, because they are relatively harmless. You cannot get a chemical burn from the same citric acid and you cannot inhale harmful fumes. And it does not have a decomposing effect on the components of the cooling system.

Secondly, many generations before us were convinced of their effectiveness. Thirdly, citric acid is great for any radiator. from aluminum to brass. Fourth, it costs a mere penny, which cannot be said about modern chemistry. The only inconvenience is, unlike branded formulations: exact instructions. how to rinse. are not attached to the citric acid sachets. You need to remember how much of it is required, or act at random, empirically calculating the consistency.

The proportions of flushing the engine cooling system with citric acid: what they are is a rather controversial issue. Many who have used it have their own opinion on this matter. However, let’s try to establish the best ratio.

When is it time to go for citric acid?

Of course, a decent owner regularly washes the insides of his car and does not bring them to a sad state. However, if you, for example, are not the first owner of a car and do not know when the flushing procedures were carried out, you should think about them if:

    the engine often overheats;

If these signals are neglected, the next stage will be the boiling of the coolant.

Tips Tricks

As you can see, the amount of citric acid in the solution can be considered conditional. In this case, you should not strive to significantly exceed the concentration, since citric acid in large quantities can also be aggressive towards individual parts of the cooling system.

The next day, refill the cleaner and repeat the rinsing under load. Only after the drained flushing and distilled water are clean, fresh antifreeze is poured into the system.

Finally, we note that preventive flushing of the engine cooling system with citric acid or other means can extend the life of individual parts of the specified system and reduce the load. It is also possible to increase the resource of antifreeze or antifreeze.

Remember, the proper operation of the engine cooling system allows you to maintain an optimal temperature balance in any conditions, which has a positive effect on the overall service life of the internal combustion engine.

How often antifreeze replacement is required. Self-flushing of the cooling system from dirt, scale and rust. Means for flushing the engine cooling system.

The difference between antifreeze and antifreeze, the compatibility of different types of coolant. What to choose, antifreeze and antifreeze. How to change the coolant in a car.

Flushing the radiator of the engine cooling system with your own hands. How and what is the best way to flush the radiator from the inside without removing it from the car.

Replacing the coolant working fluid of the engine cooling system. Features of the drain procedure. Removing residual antifreeze from the cylinder block.

Why does engine overheating occur? What can the driver expect and what damage can occur if the engine overheats. What to do if the internal combustion engine overheats.

Common breakdowns of the engine cooling system: water pump, thermostat, radiator, cooling fan, and others. How to determine the reasons yourself.

How to check if there is scale?

If you are not sure if your machine needs cleaning and you want to check whether the heating element has really been attacked by lime deposits, you can check it yourself.

Recommendations for using citric acid

In order to achieve maximum effectiveness from this folk remedy and avoid damage to the washing machine, you must heed the following tips:

  • It is recommended to use only citric acid in powder form, but not natural juice. Of course, it is safe for the surface, but it will definitely not be able to cope with scale and plaque due to the low concentration of acid.
  • According to the manufacturer’s recommendations for most washing machine models, you should wash your laundry at a temperature of no more than 60 degrees, otherwise plaque will constantly collect.
  • When trying to clean the appliance, do not put too much powder into the drum, because in high concentration it poses a danger to the internal elements of the washing machine. This will negatively affect its functioning.
  • During prolonged reading, the water should not be heated too much. the interaction of “citric acid” with boiling water for a long time can contribute to the breakdown of the device.
  • In order not to have to use acid to clean the heater and drum, it is necessary to prevent scale in time. For this purpose, manufacturers produce special powders and tablets that significantly soften water. Some detergents already contain similar components. For the purpose of additional prevention, it is recommended to install special filters on the water supply system, which prevent salts from entering the system.
  • When cleaning the drum with citric acid, do not load clothes. Of course, there are some popular recipes that allow the use of “citric acid” as a bleach. However, a high concentration of this agent only destroys fibers, so you risk permanently ruining your favorite thing.
  • Stay close to the washing machine during the procedure, as lemon powder often breaks down large pieces of deposits that can block the pipe. In the event of such a problem, it remains only to disconnect the pipe and clean it yourself with a cable.
  • In order to avoid lint particles from sticking to the heater, do not wash woolen or too old items in the drum. If there are many such things, they are washed in a special textile bag.

Cleaning the washing machine with lemon acid

Only with proper cleaning with citric acid can scale and plaque be quickly removed. There are several basic guidelines for making effective cleaning:

  • optimal dosage;
  • a certain duration of cleaning;
  • temperature regime of water.

In addition, you will need to take into account other nuances, which we will consider in more detail.

–Prophylactic cleaning of the washing machine. Cleaning instructions

Taking into account the recommendations on how to get started, and how much acid you need to select, you can clean your clipper in this aLGorithm:

  • Pour the required amount of citric acid powder into the detergent compartment or directly into the drum. The first option is preferable, since it will clean all the parts due to contact with the powder.
  • Select a wash program with hot water at least 60 ° C. Most often, this temperature can be achieved by using the Cotton setting. If the washing machine has not been cleaned for a long time, then select the highest temperature setting. The program must be complete, including both rinsing and spinning.
  • We start the washing machine, and if there is an opportunity to look at what comes out of the drain, then after the allotted time you will see the amount of dirt and incomprehensible deposits that were inside your assistant.
  • At the end of the work cycle, lift the rubber pad, check for pieces of scale under it. If there are any, wipe the parts and drum with a soft cloth and leave the machine door open until it is completely dry.

Pros of cleansing

Citric acid was not chosen for such cleaning by chance, but due to the following characteristics:

  • is an excellent low-cost option for maintaining the internal cleanliness of the machine;
  • rinses out completely during rinsing;
  • a natural remedy that does not harm the sensitive skin of babies and adults with problem skin;
  • due to its composition (class of carboxylic acids), it reacts with deposits accumulating on the heating element and other parts of the machine and dissolves them.

Washing machine cleaning process with citric acid

Before starting work

Before proceeding directly to cleaning, take a soft, clean cloth and look under the rubber pad. It must be wiped with a soft damp cloth, removing all dirt.

Also look into the drum and check for items in it. No lost socks and handkerchiefs should be left there. Only after making sure that the machine is completely empty, you can start the process.

Other methods of cleaning the washing machine from deposits and limescale

In addition to “citric acid”, there are many other products that deal with such contamination. They can be used alone or in combination with citric acid.

Specialized tools table.

Name Short description
Dr. Tubular HeaterThis is a powdery product that is designed to break down scale on any household appliances. Including dishwasher, washing machine, kettle.
AnticalcIt is a universal gel that quickly removes plaque.
TopperrIt is this tool that is actively recommended by many appliance manufacturers, because it is able to remove even complex dirt and a dense layer of scale.
DR. BeckmannThis tool is often used to prevent scale and plaque. Plus, it effectively fights odors and bacteria. However, in the presence of heavy contamination, it will be ineffective.
Magic powerThis is one of the most effective remedies for limescale and any other contamination. It is produced specifically for washing machines. Allows you to remove plaque from the heater.
EntkalkerAvailable in powder form, it helps to get rid of even stubborn deposits. This product is economical, because one application requires several grams of powder.
FilteroThis product is also made to remove old limescale marks. It should be applied twice in 12 months.
READ  How To Open The Lid Of A Washing Machine Bosch

Note! Another effective anti-scale agent is CaLGon. Nevertheless, the components of the composition do not allow splitting the existing plaque. they only prevent its appearance, therefore it is advisable to use it from the moment of purchase of the equipment.

Table Folk remedies against scale.

View Brief description
Baking sodaThis product has been used for cleaning all kinds of appliances for several decades. It can be applied in various ways:
If a lot of scale has accumulated on the surface of the Tubular Heater, it will need to be removed first (this is possible on modern models). After that, clean the surface with a damp cloth and soda and put it back in place.
Soda can be added to the washing machine while cleaning with citric acid. These components react quickly and remove even difficult dirt.
VinegarIt is recommended to use vinegar 9% during the cleaning process. It, like citric acid, should be poured into the powder compartment, and then start washing.

How to check equipment for limescale?

Cleaning the instrument with acidic powder should be treated as a serious procedure. This means that it is not recommended to carry it out unnecessarily, therefore, the hostess’s primary task is to check the device for plaque and scale:

  • You need to take a flashlight and look into the drum. First of all, you need to check its lower part, because in most models the Tubular Heater is located there. In addition, you should inspect the entire drum by turning it by hand. usually traces of plaque and scale are immediately visible.
  • In most cases, limescale appears with frequent washing at high temperatures. Therefore, if you regularly wash at a temperature of 80-85 degrees, most likely the appliance needs cleaning.
  • Scale is collected from hard tap water, and its characteristics can be checked either by special tests or by settling. In addition, if scale accumulates on a kettle and other similar devices, then it is also in the washing machine.

Limescale can also be recognized by the following signs:

  • fabrics after washing have a musty smell;
  • the device is too noisy;
  • on light clothing, spots of gray and yellow are clearly visible;
  • even when changing the gel or powder, the washing quality of the laundry is poor;
  • the water heats up slightly.

If there are several such problems, you will urgently need to clean the device with citric acid, otherwise it will not be possible to save it.

How much citric acid to pour?

It will be equally unhelpful for the technique to both underfill the lemon powder and overfill it. The dosage of the product should be strictly observed, it is determined based on the volume of the washing machine tank. To clean a 5 kg washing machine, you will need about 100 grams of citric acid.

It is important that the machine stops with water during the cycle. This will allow the Tubular Heater and other elements of the machine to be “discarded” in the solution. Therefore, you must select a suitable washing program. Let’s figure out how to properly clean the washer with citric acid.

Is citric acid harmful?

It has been proven for a long time that citric acid effectively cleans the internal elements of the washing machine and corrodes scale well. But how safe is this folk remedy for machine parts? In fact, if the dosage is observed, it does not harm the citric acid technique.

Of course, if you pour too much lemon powder into the washer and run a wash that warms the water to 90 ° C, you can expect unpleasant consequences. In this case, there is a risk that rubber gaskets and plastic parts will suffer from the acid. Limescale will begin to come off right with the pieces of rubber.

Citric acid also works in cold water, heating is necessary to speed up the cleaning process, so it is optimal to run a wash cycle with a temperature of 60 ° C.

Many housewives who wash the washing machine in a timely manner distinguish citric acid from other cleaning agents, and give preference to it. The explanation is simple: citric acid is effective, safe for humans, hypoallergenic, unlike household chemicals, it is simply rinsed out and costs a penny.

You don’t need to clean your clipper too often with citric acid. Two or three times a year recommended by specialists will be enough. The benefits of citric acid lie precisely in its reasonable use.

How much citric acid is needed to clean a 5 kg washing machine?

It is necessary to periodically rinse the inside of the machine using special products. This will prevent the formation of limescale on the washer parts. You can use commercially available household chemicals, or use citric acid. Let’s figure out how much “citric acid” is needed to clean a 5 kg automatic machine.

Cleaning instructions

Washing the machine does not take much time, effort and money. To clean a 5 kg washing machine, you should prepare only 2 bags of citric acid, 50 grams each, and a dry cloth. The aLGorithm of actions will be as follows:

  • make sure there is no laundry in the machine drum. If the item is rinsed in a citric acid solution, it will lose color;
  • Pour 80-100 grams of lemon powder into the detergent drawer. It is allowed to put citric acid directly into the drum, but in the first case, the cuvette and branch pipe will also be cleaned:
  • select a wash program that includes rinsing. Spin is not needed, so it is better to disable this function when it is provided by the mode;

If cleaning is carried out regularly, and the scale layer is insignificant, it is enough for the water to warm up to 60 ° C during washing, when the machine has not been washed for a long time, the temperature is set to 90 ° C.

  • check that the hatch door is tightly closed, the container for detergents is inserted all the way;
  • start the cycle by pressing the “Start” key.

After the end of the program, open the door and fold back the door cuff. If there are any lumps of limescale there, remove them and wipe the drum and gum surface with a dry cloth. It is also important to unscrew the trash filter and remove any remaining water from the drain system. Be sure to dry the powder receptacle.

Do not be alarmed if you see lumps of scale in the drum during washing. Everything is fine, which means that citric acid really coped with its task, removing plaque from the “insides” of the washing machine. It is recommended to clean the machine with citric acid every 4 months. If the water in your area is too hard, flush the equipment every 30 cycles. When the hardness of tap water is low, the procedure can be carried out once every six months.

Citric acid substitutes

It is imperative to observe the dosage and the procedure for using a special anti-scale composition, “overdoing it” with the agent, you can do great harm to the automatic machine, provoking a breakdown.

Many people wonder if it is allowed to replace lemon powder with freshly squeezed lemon juice. Doing so is not worth it, the desired effect will not be achieved, because the concentration of acid in the fruit is much lower. It is also not recommended to use vinegar instead of citric acid, as it can damage individual parts of the machine.

Some users clean the washing machine outside the box. using Coca-Cola. In this case, you need to pour 3 liters of drink into the drum and start a wash program with water heating up to 60 ° C. There will be no trace of scale.

So that the layer of plaque on the internal parts of the washer is not critical, it is important to observe several rules when using the machine. Experts advise:

  • use water softeners if the water is too hard. Some powders for automatic machines have already added water softening components;
  • do not exceed the dosage of detergents recommended by the manufacturer;
  • do not wash old clothes in the machine. Scraps of fabric will settle on parts of the machine, forming a plaque;
  • choose washing programs that heat water to no more than 75 ° C;
  • be sure to ventilate the machine after the end of the cycle. You should leave the hatch door open, it is better to pull out the powder receptacle and dry it. Wipe the drum surface with a dry cloth.

So, it is very easy to rinse the inside of the machine with citric acid. It is necessary to pour the required amount of grams of citric acid into the powder receptacle and start the program. The washing machine will do the rest on its own. Observe the frequency of cleaning the machine so that the scale layer does not become critical. It is also important to properly care for your “home mate” to prevent plaque build-up.